Metric & Inch Reading - Graduation: 0.02mm/0.001"

Incorporating Quadri feature - gives outside, inside, depth and step readings.

Fine adjustment feature allows improved sensitivity of slider movement.

14° vernier face angle reduces parallax.



Satin chrome finish with clear easy read graduations.

Test the safety and performance of a type 1, level 1 or level 2 electric vehicle ac charging stations (EVSEs) with the Fluke FEV100. This test adapter simulates the presence of an electrical vehicle, allowing you to conduct tests in combination with appropriate test instruments such as a digital multimeter or oscilloscope. Use the FEV100 to verify an EVSE is working properly after install and during periodic maintenance, or troubleshoot an EVSE if it is not delivering the appropriate charge.
Electrical safety
EVSE charging cables may become damaged over the course of use, increasing electric shock risks to users. Stay protected from and check risk of electric shock with the GFCI trip test. This function verifies the breaker of the EVSE is connected by detecting ground faults. Additionally, the PE grounding protection pre-test verifies that there is no presence of dangerous voltage at the ground terminal.
Simplicity and convenience
Perform a variety of tests including ground fault checks, insulation of wires, measuring voltage and duty cycle to see max current available for charging all in one adapter that safely integrates with the Fluke portfolio of test and measurement tools. There is no need to bring an electric vehicle onsite for EVSE troubleshooting: the adapter acts as an electric vehicle when connected to an EVSE for easy performance and maintenance testing.
Recommended tools for use with the FEV100

Key features
• Check protective earth for correct wiring and functioning with the PE pre-test feature.
• Perform GFCI troubleshooting of EVSE and verify operation within safety standards.
• Test charging states of EVSE with CP state simulation.
• Verify charging voltage and maximum available current using a multimeter.
• SAE J1772 compliant to North American standards.

The Fluke 1507 is a versatile, compact, handheld insulation tester for advanced industrial and electrical insulation testing. Its multiple test voltages make it the ideal tool for many troubleshooting, commissioning, and preventative maintenance applications.
Take advantage of the 1507 full feature set to easily and quickly perform advanced insulation resistance testing. Its handy size and light weight make it easy to pack and use. Additional features, like the remote probe, save both time and money especially when performing repetitive tests. And its reasonable price and rugged reliability make it an excellent value.
Other useful capabilities:
• Performs insulation tests from 0.01 MΩ to 10 GΩ
• Includes live circuit detection to prevent insulation test if voltage >30 V is detected
• Includes auto-discharge of capacitive voltage for added user protection
• Measures AC/DC voltage from 0.1 V to 600 V and resistance from 0.01 Ω to 20.00 kΩ
• Provides lo-ohms earth-bond continuity (200 mA)
• Simplifies repetitive or hard-to-reach testing with the remote test probe
• Saves battery power with auto power off
• Presents results on a large, backlit display
• Features CAT IV 600 V overvoltage category rating
• Comes with remote probe, test leads, test probes, alligator clips and one-year warranty
• Accepts optional Fluke TPAK magnetic hanging system to free your hands for other work
• Runs on four AA alkaline batteries (NEDA 15 A or IEC LR6) for at least 1000 insulation tests

Key Features
• Rugged, compact advanced insulation resistance tester for electrical contractors and industrial and commercial electricians
• Automatically calculates Polarization Index and Dielectric Absorption Ratio
• Makes repetitive tests simple and easy with a Compare (Pass/Fail) function
• Offers multiple insulation test voltages: 50 V, 100 V, 250 V, 500 V, and 1000 V

The Fluke 3130-G2M Portable Pressure Calibrator is designed for professionals who demand speed, accuracy, and convenience in pressure calibration. Combining robust pressure generation, high-precision measurement, electrical testing, and exceptional portability, the 3130-G2M delivers a complete solution for field and lab calibration tasks.

Key Features and Benefits

• Integrated Motorized Pump – Say goodbye to manual hand pumps. The powerful, internal motorized pump delivers fast, effortless pressure generation and control, saving time and eliminating operator fatigue.
• Supports Large Volume Applications – Easily connect to an external gas supply, such as plant air, for quick pressurization of large systems. Fine-tune pressure precisely with the built-in variable volume.
• High-Accuracy Pressure Measurement – The onboard sensor provides reliable measurements up to 2 MPa (300 psi, 20 bar) with outstanding accuracy of ±0.025% of reading + 0.01% FS—including all major sources of error.
• Flexible Measurement Range – Expand your capability by connecting Fluke 700P pressure modules, ensuring precision across a wider range of pressures for any application.
• Comprehensive Electrical Measurement – Calibrate pressure transducers and transmitters with built-in support for 4–20 mA and 0–30 V DC measurements. The 3130-G2M can also supply 24 V DC power and source 4–20 mA current, streamlining transmitter testing.
• Rugged, Portable Design – Built tough for the field, the 3130-G2M features a ruggedized case with internal storage for leads, fittings, and power supply. A rechargeable NiMH battery delivers up to 50 hours of operation, or 100 calibrations to 300 psi per charge.
• Simple Battery Recharge – Just plug in with the included universal mains adapter—no special chargers required.
• Seamless Automation and Data Logging – Easily connect to your PC using the Fluke Calibration 700SC Serial Interface Cable and control your calibrator or log data using Fluke Calibration COMPASS for Pressure software.
Designed for True Portability and Productivity
• Lightweight and Compact – Carry the 3130-G2M anywhere; internal storage keeps everything organized and ready for action.
• Field-Ready Power – Up to 50 hours of battery life means you can work longer between charges, with enough power for a full day’s work in demanding environments.
• Easy to Use – Intuitive controls, clear displays, and straightforward operation reduce training time and make every calibration easier.
Automate, Document, and Improve Accuracy
Connect the Fluke 3130-G2M Portable Pressure Calibrator to your PC to automate calibration routines, log results, and enhance traceability. With Fluke COMPASS for Pressure software, you can streamline workflows, improve data integrity, and deliver professional calibration documentation—right from the field.

Experience the convenience, accuracy, and rugged reliability of the Fluke 3130-G2M Portable Pressure Calibrator—your all-in-one solution for pressure calibration, wherever the job takes you.

Key Features
• Measure/generate pressures from vacuum to 2 MPa (300 psi, 20 bar).
• Measure/generate 4 to 20 mA, measures 0 to 30 V DC
• Generate vacuum to -80 kPa (-12 psi, -0.8 bar) or pressure to 2 MPa (300 psi, 20 bar).
• External gas supply up to 2 MPa (300 psi, 20 bar).
• Fine pressure adjustment.
• Measurement accuracy of ± (0.025 % reading + 0.01 % FS).