Abrasive
York Flap Wheel, 40 x 20mm, P80, Aluminium Oxide, 6mm Shank
Shaft mounted flap wheels can be used in portable air or electric power tools, including die grinders, flexible shafts and drills.
Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.
Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market
Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass
Notes
• Images are for illustration purposes only
Used for a wide range of applications such as removal of rust, cleaning up welds and sanding wood prior to painting.
Features and Benefits
• Recessed hub design for maximum access in tight corners
• Highly efficient design
• Durable construction means the flap wheels last longer than others on the market
Typical Applications
• Final finishing of metal surfaces
• Miss-match removal and de-burring on machined components.
• Blending and finishing tool, tubes, dies, moulds, channels
• Edge blending and cleaning. Surface preparation prior to painting and plating
• Can be used on metals, woods, plastic and fibreglass
Notes
• Images are for illustration purposes only
Download
Products Lainnya
Plain metal handles, with steel wire or nylon bristle filling. Perfect for heavy duty cleaning and decarbonising.
Features and Benefits
• Durable
• Effective at all cleaning and decarbonising tasks
Typical Applications
• Suitable for heavy duty cleaning and decarbonising
Features and Benefits
• Durable
• Effective at all cleaning and decarbonising tasks
Typical Applications
• Suitable for heavy duty cleaning and decarbonising
Non-Reinforced Toolroom Cutting Wheels
Thin slitting discs in aluminium oxide grain for all toolroom cutting-off applications.
Thin slitting discs in aluminium oxide grain for all toolroom cutting-off applications.
'B' Shape - Shank Diameter 3mm
Features and Benefits
• All points are aluminium oxide with 'rubenite™' as standard for all general-purpose grinding and deburring on steels and most metals
• Durable and reliable constrution
Typical Applications
• Suitable for portable die and straight hand grinders
Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
Features and Benefits
• All points are aluminium oxide with 'rubenite™' as standard for all general-purpose grinding and deburring on steels and most metals
• Durable and reliable constrution
Typical Applications
• Suitable for portable die and straight hand grinders
Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only
PF-ZR
Flaps of heavy-duty cut and polish web. Leaves a uniform finish whilst removing handling marks and imperfections.
Features and Benefits
• Aluminium oxide material easily removes surface imperfections, resulting in a much faster cut
• Easy abrasive wheel attachment heavy-duty design for a longer brush life
• Load-resistant open web produces a consistent finish
• Open web conforms to substrate, to minimise gouging
Flaps of heavy-duty cut and polish web. Leaves a uniform finish whilst removing handling marks and imperfections.
Features and Benefits
• Aluminium oxide material easily removes surface imperfections, resulting in a much faster cut
• Easy abrasive wheel attachment heavy-duty design for a longer brush life
• Load-resistant open web produces a consistent finish
• Open web conforms to substrate, to minimise gouging