Products

Double sided perfo panel racks constructed from sheet steel with a hard wearing powder coated finish. Come complete with hook kits with varying pieces included.
Images are for illustration purposes only.
Tools not included.

• Be aware of voltage easily - the tip glows red and a beeper sounds when voltage is detected

• Continuous self-test so you always know it’s working

• Voltage detection range for wide application use - 90 V to 1000 V AC or 200 V to 1000 V AC

• Audible/Silent mode for added convenience

Gembok dengan body Baja Laminated, Lebar 1-9/16in (40mm)

Fitur Produk:
– Gembok pengaman dengan body baja laminasi yang diperkuat dengan bumper hitam
– Ideal ketika gembok dapat mengalami hantaman keras
– Kunci berbeda dengan silinder tumbler 4-pin
– Shackle berdiameter 9/32 inci (7 mm) dengan jarak bebas shackle 3/4in (19mm)
– ?Dual ball bearing locking? untuk ketahanan terhadap cungkil extim
– Lebar Body: 1-9/16in (40mm)
– Dimensi Keseluruhan, A: 9/32in (7mm) B: 3/4in (19mm) C: 5/8in (16mm)

• No close tolerances
• Pulsation-free flow
• Laminar flow
• Non-impinging, preventing degradation
• Does not emulsify or damage delicate and shear sensitive products
• Includes in-line, close-coupled, side-by-side, over-under, and self-priming configurations

Type of Luminaire : High Bay Special Environment
Set Model No : NNFC2004788
Type of Light Source LED
Power Input : 150W
System Lumen Output : 21000 lm
System Efficacy : 140 lm/W
Power Voltage : 220-240V
Power Factor : 0.9
Lifetime : 50000H(L70)
CCT : 6500K
CRI : 80
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Beam Angle : 110deg.
IP Rating : 65
Ambient Temperature : -40 - 60°C
Dimensions : 305mmx172mm
Weight : 2.9 kg
Body : ADC(Black)

Connector to Male Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

The Kennedy® variable pitch hole saws deliver high quality holes in a range of materials, including wood, steel, brass, bronze, and cast iron. The M3 HSS cutting teeth aggressively cut to give a very smooth finish with little to no tear out.

Features and Benefits
• Cuts up to 40% faster than constant pitch saws
• Varying tooth pitch disrupts harmonics to substantially reduce noise
• Tooth life is extended when used in conjuction with a cordless drill

Typical Applications
• Construction
• Engineering
• Maintenance

Notes
• 4-6 teeth per inch
• 28.5mm (11/8") cutting depth

These Bi-Hexagonal 1/2in. square drive sockets possess a 12 point - side drive design that gives a higher torque than normal sockets, allows the product to grip worn nuts and will not round off existing nuts. All sockets have a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories and the unique design requires only a one-twelfth turn to engage the next point of the socket. Available in a variety of imperial sizes, each piece is manufactured from chrome vanadium steel, is chrome plated and has a highly polished mirror finish.

Features and Benefits
• Available in a range of sizes to suit your requirements
• Manufactured from chrome vanadium steel which is highly durable
• Highly polished chrome plated finish protects the product against corrosion as well as repelling dirt and grime
• Bi-hexagonal side drive design allows the user to deliver more torque than a standard socket for easier turning
• Able to grip worn nuts as well as not rounding off existing nuts
• Ball retaining groove on each face of the square drive ensures a positive fit with accessories

Typical Applications
• Construction
• Plumbing
• Automotive

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

If you are looking for protection against cryogenic hazardous substances and low concentrations of acids and alkalis then the Dräger CPS 6800 chemical protective suit is the right choice. The new and innovative suit design is more flexible and allows you to comfortably enter confined spaces.

- Relative time clocks at MIN, MAX and AVG provide a time reference for important events

- The Electronic Offset function enables thermocouple error compensation to maximize overall accuracy

- Measures J, K, T, and E thermocouple types

- Result reading in ºC, ºF or Kelvin (K)

- Splash and dust resistant bag with shock absorbing holster

- Front panel that is easy to set up and operate

- Sleep mode increases battery life, typical 1000 hours of battery life

- The battery cover makes it easy to replace the battery without opening the calibration seal

- The optional ToolPak accessory allows the thermometer to be hung from any metal object (with a rare earth magnet) or secured around a pipe (with a - hook-and-loop strap) for hands-free operation.

- 3 year warranty

Our horizontal multistage centrifugal pumps are made of multiple Discpacs, which feed into one another. These stages allow for higher levels of control over the output pressure.