CRC Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz 05151

Maintaining clean brake and disc parts can improve the life of your car's braking system and keep you safe on the roads. Using a brake parts cleaner for cleaning and degreasing is a great way to maximize the performance and increase the longevity of your entire brake system. While there are several non-chlorinated brake cleaners on the market, not all can guarantee the cleaning power and effectiveness you need. CRC Brākleen® offers a powerful spray cleaner that works like no other and is compliant with VOC regulations in every area of the country.

Applications
ABS, disc, drum, brake cylinders, brake drums, brake linings, brake shoes, calipers, clutch discs, disc brake pads, discs. Safe for use on all brake systems including: Springs & Wedge brakes

WHERE TO BUY

SCAQMD Rule #1171 Compliant
Volatile Organic Compounds (VOC) are limited in some states, meaning products that contain them must meet strict requirements to be sold. The strictest areas require a VOC limit of less than 25 g/L. The SCAQMD Rule #1171 Compliant formula ensures you can use Brākleen® no matter where your business or home is located, while still providing the cleaning power and effectiveness for which CRC is famous. Like all non-chlorinated brake cleaners, it is flammable and should be used with caution. Use in a ventilated area and don’t forget to wear your gloves.

Effective Brake Cleaning
Brake systems parts are among the auto parts that require the most frequent cleaning. Grease, brake dust, fluid, and oils accumulate over time and can cause premature wear and lower brake performance. Brākleen® cleans and dries fast to remove contaminants from your parts and leaves no residue. The powerful formula restores brake performance and eliminates squeaks and squeals. It uses a carbon dioxide propellant and will not corrode components. It is designed for the ABS, brake disc, brake drum and cylinders, linings, calipers, brake shoes, clutch discs, brake pads, and more.

A Safer and Smarter Product
Using Brākleen® makes maintaining brake system parts simple. This ultra-low VOC formula comes in a 14-ounce aerosol can and is great for removing grease, brake fluid, oil, dust, and other buildup. Just spray from about two feet away and let the solvent do its job.Get rid of dirt, oils, grease, and other contaminants using CRC Brākleen® Brake Parts Cleaner SCAQMD #1171 Compliant formula. CRC is the #1 brand in brake cleaner worldwide, with years of experience providing safe, reliable products.

Download

Produk Lainnya

Kennedy-Pro Electricians Screwdriver Slotted 5.5mm x 125mm

A range of fully insulated slotted head screwdrivers VDE tested up to 1000V. With professional high grip handles, magnetic tips and chrome vanadium steel blades. Slotted head screws are the most commonly used screw. To safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Features and Benefits
• Magnetised tips hold the fasteners firmly in place to allow you to accurately deliver torque
• VDE tested up to 1000V to ensure your safety
• Manufactured from robust chrome vanadium steel for longevity
• High grip handles ensure maximum control, grip and comfort when using
• Phosphated black finish further protects the product against corrosion as well as more general wear and tear
• Available in various sizes to suit your preference and needs

Typical Applications
• Electrical
• Construction
• Engineering

Kennedy Single End, Ring Slogging Spanner, 24mm, Metric

Manufactured from forged and hardened steel, these ring slogging spanners also possess machined drive faces to ensure good contact with the fastener. With flat striking faces to allow hammer blows to be used to loosen or tighten stubborn fasteners, the product is available in a variety of metric sizes to ensure you find the correct size for your needs.

Features and Benefits
• Forged steel construction makes for a durable product
• Flat striking faces enable the product to be struck with a hammer if needed
• Corrosion-resistant finish bolsters product longevity
• Available in an array of sizes to suit varying specifications

Typical Applications
• Automotive
• Construction
• Plumbing

Standards
• Conforms to DIN 7444

Kennedy Hex Key, L-Handle, Hex, Metric, 8mm, 10-piece

Manufactured from fully hardened carbon steel, these quality long arm, ductile key L-wrenches/Allen keys are precision-made with accurate AF dimensions for quality you can rely on.

Features and Benefits
• Precision square cut ends for full socket contact
• Fully hardened carbon steel for durability
• Comfortable grip for improved torque

Typical Applications
• Installation and removal of fasteners

Standards
• DIN ISO 2936

Kennedy-Pro Screwdriver Phillips PH0 x 40mm

Expert quality, hardened and tempered chrome alloy steel blades. Fitted with a unique dual grip handle with revolving top designed for added user comfort whilst allowing more torque to be applied.

Crosspoint
Crosspoint screws virtually eliminate the screwdriver slippage if the correct size is used. The No.2 driver is suitable for most applications.

CRC Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz 05151

Informasi Pemesanan