Tools & Chemicals
Kennedy Hi-Grip, Flared/Phillips/Pozi, Screwdriver Set, Set of 12
Designed for maximum grip under load application, this 12 piece screwdriver set contains an array of Pozi, Phillips and Flared drivers. All products possess a red moulded cushion grip to give optimum operator comfort. Ideal for assembly work, each driver boasts a blade made of tough chrome vanadium steel with a satin finish and magnetic tips, hardened and ground to prolong tool life. Supplied in a clear plastic wallet.
Features and Benefits
• Each driver possesses a red moulded cushion grip for maximum comfort, grip and control when using
• 12 piece set ensures you have a variety of screwdriver styles to hand for multiple applications including Flared, Pozi and Phillips
• Magnetic tips effectively hold fasteners in place when loosening or tightening
• Blades are manufactured from tough chrome vanadium steel for overall tool longevity
• Supplied in a clear plastic wallet to protect, organise and store your tools
Contents
• Flared: 6.5 stubby, 6.5 x 100, 6.5 x 150, 8.0 x 200 and 10.0 x 250
• PZ: No.1 x 75, No.2 x 100, No.3 x 150
• Crosspoint: No.1 x 75, No.2 stubby, No.2 x 100, No.3 x 150
Typical Applications
• Engineering
• Construction
• Automotive
• DIY
Features and Benefits
• Each driver possesses a red moulded cushion grip for maximum comfort, grip and control when using
• 12 piece set ensures you have a variety of screwdriver styles to hand for multiple applications including Flared, Pozi and Phillips
• Magnetic tips effectively hold fasteners in place when loosening or tightening
• Blades are manufactured from tough chrome vanadium steel for overall tool longevity
• Supplied in a clear plastic wallet to protect, organise and store your tools
Contents
• Flared: 6.5 stubby, 6.5 x 100, 6.5 x 150, 8.0 x 200 and 10.0 x 250
• PZ: No.1 x 75, No.2 x 100, No.3 x 150
• Crosspoint: No.1 x 75, No.2 stubby, No.2 x 100, No.3 x 150
Typical Applications
• Engineering
• Construction
• Automotive
• DIY
Download
Produk Lainnya
With a head of 99.9% pure electrolytic copper and a resilient plastic handle, this mallet provides a firm, positive blow without the risk of damage to expensive components. Ideal for positive blows on highly finished or closely ground machined parts in the aircraft, automotive or shipping industries. Also used by tool and gauge makers. This mallet is not recommended for non-sparking applications
Features and Benefits
• Provides a strong blow without inflicting damages to the desired workpiece
• Plastic handle is highly robust and helps deliver firm blows
• Copper head is durable and resistant to wear and tear
• Faces can be replaced when necessary
Typical Applications
• Automotive
• Assembly
• Aircraft
Features and Benefits
• Provides a strong blow without inflicting damages to the desired workpiece
• Plastic handle is highly robust and helps deliver firm blows
• Copper head is durable and resistant to wear and tear
• Faces can be replaced when necessary
Typical Applications
• Automotive
• Assembly
• Aircraft
CRC Mass Air Flow Cleaner was the first item on the market specifically designed to clean the mass air flow (MAF) sensor in your car, which can increase horsepower, enhance fuel efficiency, and improve engine performance. Safe on all car parts and plastic, it dries instantly, removes buildup and debris, and leaves behind no residue or chemical buildup.
Applications
Mass air flow sensors & housing
Applications
Mass air flow sensors & housing
• Memperbaiki finishing mesin dan memperpanjang masa pakai perkakas
• Mengurangi torsi pemotongan dan meningkatkan efisiensi pemotongan
• Lapisan film yang tidak berwarna, tidak berbau, tidak meninggalkan noda
• Mengurangi torsi pemotongan dan meningkatkan efisiensi pemotongan
• Lapisan film yang tidak berwarna, tidak berbau, tidak meninggalkan noda
Club (or lump) hammers are fully forged and heat treated with a flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails. Fitted with a fibreglass shaft and textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user's hand and wrist which in turn reduces operator fatigue and the risk of repetitive strain injury (RSI).
Features and Benefits
• Fibreglass shaft dampens impact through the user's hand and wrist to minimise the risk of RSI (Repetitive Strain Injury)
• Textured slip-resistant grip improves user control and comfort
• Head is manufactured from fully forged steel for durability and good impact
• Possesses an anti-vibration design
Typical Applications
• For use with cold chisels, brick bolsters, star drills and masonry nails
Features and Benefits
• Fibreglass shaft dampens impact through the user's hand and wrist to minimise the risk of RSI (Repetitive Strain Injury)
• Textured slip-resistant grip improves user control and comfort
• Head is manufactured from fully forged steel for durability and good impact
• Possesses an anti-vibration design
Typical Applications
• For use with cold chisels, brick bolsters, star drills and masonry nails