Tools & Chemicals
Kennedy Adjustable Spanner, Steel, 8in./200mm Length, 28mm Jaw Capacity
Constructed from high strength 'I' beam section vanadium steel, this range of adjustable wrenches from Kennedy® are manufactured with quality at the forefront. With heat treated jaws, a phosphated finish and slimline tapered jaws, each product guarantees an excellent performance even over time. Parallel jaws offer smooth adjustment whilst possessing a self-locking design. Completed with a 15° offset head angle.
Features and Benefits
• 15° offset head angle for positive torque control and accessibility even in awkward places
• Phosphated finish bolsters resistance to corrosion and general wear and tear
• Manufactured from high strength 'I' beam section vanadium steel to ensure product longevity
• Heat treated jaws guarantee grip and extended performance even with regular use
• Self-locking design stops the jaws opening accidentally even when under full load
Typical Applications
• Suitable for industrial engineering, automotive, agricultural, maintenance and assembly applications
Standards
• Conforms to BS 6333-1995 and DIN3117-1988
Features and Benefits
• 15° offset head angle for positive torque control and accessibility even in awkward places
• Phosphated finish bolsters resistance to corrosion and general wear and tear
• Manufactured from high strength 'I' beam section vanadium steel to ensure product longevity
• Heat treated jaws guarantee grip and extended performance even with regular use
• Self-locking design stops the jaws opening accidentally even when under full load
Typical Applications
• Suitable for industrial engineering, automotive, agricultural, maintenance and assembly applications
Standards
• Conforms to BS 6333-1995 and DIN3117-1988
Download
Produk Lainnya
These fully insulated screwdrivers have been VDE tested up to 1000V to ensure maximum user safety. Fitted with professional high grip handles, magnetic tips and chrome vanadium steel blades finished with a black oxide coating for protection. Available in three sizes all with Phillips tips to reduce slippage on fasteners.
Features and Benefits
• Blades are constructed from chrome vanadium steel for optimum resilience
• Available in three sizes to suit your needs
• Black oxide finish protects the product against corrosion as well as wear and tear
• Magnetised tip holds the fastener in place effectively allowing you to deliver optimum torque accurately
• Dual material grip combines the rigidity of polypropylene with a thermoplastic rubber for user comfort, grip and safety
• VDE tested up to 1000V to maximise safety when working on electrics
Typical Applications
• DIY
• Automotive
• Electrical
• Construction
Features and Benefits
• Blades are constructed from chrome vanadium steel for optimum resilience
• Available in three sizes to suit your needs
• Black oxide finish protects the product against corrosion as well as wear and tear
• Magnetised tip holds the fastener in place effectively allowing you to deliver optimum torque accurately
• Dual material grip combines the rigidity of polypropylene with a thermoplastic rubber for user comfort, grip and safety
• VDE tested up to 1000V to maximise safety when working on electrics
Typical Applications
• DIY
• Automotive
• Electrical
• Construction
Featuring Ken-Grip® patented design sockets that grip fasteners that up to 95% rounded off and will not damage worn or rusted fasteners. Manufactured from Chrome Vanadium steel, they will fit a range of non-metric hexagons and E-Torx drive sizes. The screwdriver bits are manufactured from Chrome Molybdenum. Supplied in a robust case.
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive
Features and Benefits
• Ken-Grip® sockets will not round off existing nuts
• 60 piece set is extremely comprehensive to ensure you have the correct component and tool to hand no matter the application
• Screwdriver bits are manufactured from chrome molybdenum steel, whilst the sockets are manufactured from chrome vanadium steel for optimum durability
• Supplied in a robust plastic case for ease of transportation, organisation and storage of your components
Contents
• Metric sockets: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 10mm, 11mm, 12mm, 13mm. 14mm
• Crosspoint: No 1, No 2, No 3
• Pozidriv: No 1, No 2, No 3
• Torx: T5, T6, T7, T8, T9, T10, T15, T20, T25, T27, T30, T40
• Slotted: 3.5, 4.5, 5.5, 6.5, 8
• Hexagon: 1.5, 2, 2.5, 3, 4, 5, 6, 7, 8
• Tri-Wing: No 3, No 4, No 5
• Torq Set: TS.5, TS.6, TS.8, TS.10
• SIT: No 10, No 20, No 25, No 30, No 40
• Accessories: 1/4in. Square drive, 1/4in. hex magnetic bit holder, Y adaptor for cup hook, Spinner handle
Typical Applications
• Construction
• Engineering
• Automotive
This range of ball pein hammers have been manufactured from high-grade drop forged steel that has been fully heat-treated. Ideal for use with cold chisels, punches, rivets and for the shaping of metal. With fine grain, forged steel head, hardened and tempered with polished faces complete by a hardwood shaft. Available in varying sizes to suit your needs.
Features and Benefits
• Manufactured from drop forged high grade steel making for a robust product
• Head is heat treated for durability
• Solid wooden handle for bolstered grip and control when wielding
Typical Applications
• Ideal for use with cold chisels, punches, rivets and for the shaping of metals
Features and Benefits
• Manufactured from drop forged high grade steel making for a robust product
• Head is heat treated for durability
• Solid wooden handle for bolstered grip and control when wielding
Typical Applications
• Ideal for use with cold chisels, punches, rivets and for the shaping of metals
Available with either a 3in. or 4in. stainless steel blade, these locking knives are suited for cutting through a variety of materials. Each product boasts a rosewood handle, stainless steel blade and brass fittings. Suited for both left and right handed users.
Features and Benefits
• Handle is made from rosewood for resilience and bolstered user comfort
• Blades are manufactured from stainless steel for durability and precision cutting
• Available in two sizes to suit your needs
• Brass fittings hold the blade securely in place
• Ambidextrous design allows bot left and right handed users to operate the knife
Typical Applications
• Carpet Fitting
• Warehousing
Features and Benefits
• Handle is made from rosewood for resilience and bolstered user comfort
• Blades are manufactured from stainless steel for durability and precision cutting
• Available in two sizes to suit your needs
• Brass fittings hold the blade securely in place
• Ambidextrous design allows bot left and right handed users to operate the knife
Typical Applications
• Carpet Fitting
• Warehousing