Pump & Lubricants
Moresco Forging Lubricants
LUBCASTER
FORGING is processing method of creating an objective shape by compressing metallic substance in between molds. LUBCASTER is essential lubricants for producing auto engine components and safety parts.
F-55 : Light yellow transparent mucoid fluid Usable with high dilution by the high adhesion property, suitable to low temperature mold.
F-5110 : Black It is a graphite type. It has high lubricity and extends mold life.
FORGING is processing method of creating an objective shape by compressing metallic substance in between molds. LUBCASTER is essential lubricants for producing auto engine components and safety parts.
F-55 : Light yellow transparent mucoid fluid Usable with high dilution by the high adhesion property, suitable to low temperature mold.
F-5110 : Black It is a graphite type. It has high lubricity and extends mold life.
Download
Produk Lainnya
These food-grade plastic water containers from Kennedy® store and dispense large quantities of water. Secured via a collared screw top lid, each container features an on-off tap for easy dispensing and quick shut-off.
The integrated handle allows for easy transport, while the sturdy plastic construction provides reliable upright water storage.
Features and Benefits
• On-off tap for spill-free dispensing
• Moulded integral handle allows for easy transportation
• Manufactured from food-grade plastic for safety and hygiene
• Collared screw top allows for easy refill
• Detachable tap for easy cleaning
• BPA-free construction to avoid hazardous chemicals in drinking water
• Durable construction resists impact for a long service life
• Cap is secured to the bottle with a flexible band to avoid loss
• Available in 10, 15, 20 or 35 litres depending on your needs
Typical Applications
• Domestic
• Warehousing
• Facilities management
• Transport
Standards
• Food-Grade compatible (EU) No. 10/2011
• FDA 21 CFR 177.1520
The integrated handle allows for easy transport, while the sturdy plastic construction provides reliable upright water storage.
Features and Benefits
• On-off tap for spill-free dispensing
• Moulded integral handle allows for easy transportation
• Manufactured from food-grade plastic for safety and hygiene
• Collared screw top allows for easy refill
• Detachable tap for easy cleaning
• BPA-free construction to avoid hazardous chemicals in drinking water
• Durable construction resists impact for a long service life
• Cap is secured to the bottle with a flexible band to avoid loss
• Available in 10, 15, 20 or 35 litres depending on your needs
Typical Applications
• Domestic
• Warehousing
• Facilities management
• Transport
Standards
• Food-Grade compatible (EU) No. 10/2011
• FDA 21 CFR 177.1520
• No close tolerances
• Pulsation-free flow
• Laminar flow
• Non-impinging, preventing degradation
• Does not emulsify or damage delicate and shear sensitive products
• Includes in-line, close-coupled, side-by-side, over-under, and self-priming configurations
• Pulsation-free flow
• Laminar flow
• Non-impinging, preventing degradation
• Does not emulsify or damage delicate and shear sensitive products
• Includes in-line, close-coupled, side-by-side, over-under, and self-priming configurations
Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion.
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
Available to suit 25 or 205 litre containers, these syphon pumps are an efficient way of controlling and dispensing a host of fluids. Comprised of a flexible plastic outlet and semi-rigid inlet tubes, the hand pumping units incorporate one-way valves. Suited for use with petrol and diesel as well as with non-corrosive liquids. All tubes can be cut to length and are fitted with a threaded bung. Model SPS/25 has a squeeze action and models SPS/205 and SPH/205 have a plunger-type action.
Features and Benefits
• Tubes can be cut to your desired length to meet your requirements
• Suitable for use with petrol, diesel and all non-corrosive liquids
• Available to suit three sized containers
• Flexible nature allows you to manipulate the pump to your desired position
Typical Applications
• Engineering
• Aquatics
• Automotive
Features and Benefits
• Tubes can be cut to your desired length to meet your requirements
• Suitable for use with petrol, diesel and all non-corrosive liquids
• Available to suit three sized containers
• Flexible nature allows you to manipulate the pump to your desired position
Typical Applications
• Engineering
• Aquatics
• Automotive