CRC Brakleen® Pro Series Brake Parts Cleaner - Non-Chlorinated Low VOC, 19 Wt Oz 05084PS

Maintaining clean brake and disc parts can improve the life of your car's braking system and keep you safe on the roads. Using a brake parts cleaner for cleaning and degreasing is a great way to maximize the performance and increase the longevity of your entire brake system. CRC Brākleen® offers a powerful low VOC spray cleaner that works like no other. The Brākleen® Pro-Series line is designed for superior performance where it’s needed most: IN THE SHOP!

Applications
All brake parts: ABS, disc, drum, brake cylinders, brake drums, brake linings, brake shoes, calipers, clutch discs, disc brake pads, discs. Safe for use on all brake systems including Springs & Wedge brakes.

Most Powerful Low VOC Formula
Volatile Organic Compounds (VOC) are limited in some states, meaning products that contain them must meet strict requirements to be sold. Our Brākleen® low VOC formula offers the best cleaning performance in a non-chlorinated formula for states requiring a limit of 45% VOC or less. Like all non-chlorinated brake cleaners, it is flammable and should be used with caution. Use in a ventilated area and don’t forget to wear your gloves and safety glasses.

PowerJet® Spray Nozzle
Brākleen® Pro-Series Brake Parts Cleaner Non-Chlorinated Low VOC uses the PowerJet® spray nozzle that sprays with force, blasting away contaminants from your brake system. This powerful spray is designed to dislodge oils, grease, dirt, and other contaminants with little effort. The high-quality cleaning solution and stronger spray force combine to deliver a brake cleaning experience that customers prefer.

Effective Brake Cleaning
Brake systems parts are among the auto parts that require the most frequent cleaning. Grease, brake dust, fluid, and oils accumulate over time and can cause premature wear and lower brake performance. Brākleen® cleans and dries fast to remove contaminants from your parts and leaves no residue. The powerful formula restores brake performance and eliminates squeaks and squeals. It uses a carbon dioxide propellant and will not corrode components. It is designed for the ABS, brake disc, brake drum and cylinders, linings, calipers, brake shoes, clutch discs, brake pads, and more.

Fewer Cans, Less Waste
Brākleen® Pro-Series Cleaner comes in a 20-ounce shop size can, containing 50% more product than the standard size. The large can combined with the efficiency from the powerful spray and high-performance formula means going through fewer cans and creating less waste, reducing your carbon footprint.Get rid of dirt, oils, grease, and other contaminants using CRC Brākleen® Brake Parts Cleaner Non-Chlorinated Low VOC formula. CRC is the #1 brand of brake cleaner worldwide, with years of experience providing safe, reliable products.

Download

Products Lainnya

Kennedy Lump Hammer, 4lb, Fibreglass Shaft, Anti-vibration

Club (or lump) hammers are fully forged and heat treated with a flat face and chamfered edge for use with cold chisels, brick bolsters, star drills and masonry nails. Fitted with a fibreglass shaft and textured slip resistant rubber grip. Shaft and grip combine to dampen the impact transmitted through to the user's hand and wrist which in turn reduces operator fatigue and the risk of repetitive strain injury (RSI).

Features and Benefits
• Fibreglass shaft dampens impact through the user's hand and wrist to minimise the risk of RSI (Repetitive Strain Injury)
• Textured slip-resistant grip improves user control and comfort
• Head is manufactured from fully forged steel for durability and good impact
• Possesses an anti-vibration design

Typical Applications
• For use with cold chisels, brick bolsters, star drills and masonry nails

Senator Double End, Combination Spanner, 22mm, Metric

Forged from vanadium steel, these superb quality combination spanners feature a satin finish. Double-ended with a bi-hexagon ring, both ends are offset at a 15° angle for convenience.

Features and Benefits
• Fully hardened and tempered for durability
• Professional quality to suit a range of tasks
• Offset ends allow easy access to nuts and bolts
• Available in sizes ranging from 6mm-32mm to ensure you find the correct product for your application

Typical Applications
• DIY
• Engineering
• Construction
• Automotive

Standards
• DIN 3113

Kennedy Self-retracting, Safety Knife, Straight, Steel Blade

Accepting medium, heavy-duty and hook blades, this combination safety knife and strap cutter is suited for professional, industrial use. Automatically retracting when contact with the surface is lost, the knife possesses an ambidextrous design, bi-material grip and zinc alloy body.

Features and Benefits
• Steel blade is durable and holds a good cutting edge eve with extensive use
• Can be used as a regular cutting knife or a strap/tape cutter
• Automatic retraction prevents accidental cutting and bolsters the safety of the user
• Possesses internal blade storage for holding your extra blades
• Bi-material handle improves user comfort and grip

Typical Applications
• Retail
• Warehousing
• Crafts

Kennedy Hex Key, T-Handle, Hex, Metric, 3mm

Hexagon T-Handle Wrenches designed to offer maximum torque transfer with minimum effort

Features and Benefits
• Ergonomically designed handle to provide high grip and torque with user comfort
• Manufactured for hardened carbon steel for resistance against wear and abrasion
• Available to purchase in varying sizes

Typical Applications
• Bicycle Repair and Maintenance
• Assembly

CRC Brakleen® Pro Series Brake Parts Cleaner - Non-Chlorinated Low VOC, 19 Wt Oz 05084PS

Informasi Pemesanan