CRC Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz 05151

Maintaining clean brake and disc parts can improve the life of your car's braking system and keep you safe on the roads. Using a brake parts cleaner for cleaning and degreasing is a great way to maximize the performance and increase the longevity of your entire brake system. While there are several non-chlorinated brake cleaners on the market, not all can guarantee the cleaning power and effectiveness you need. CRC Brākleen® offers a powerful spray cleaner that works like no other and is compliant with VOC regulations in every area of the country.

Applications
ABS, disc, drum, brake cylinders, brake drums, brake linings, brake shoes, calipers, clutch discs, disc brake pads, discs. Safe for use on all brake systems including: Springs & Wedge brakes

WHERE TO BUY

SCAQMD Rule #1171 Compliant
Volatile Organic Compounds (VOC) are limited in some states, meaning products that contain them must meet strict requirements to be sold. The strictest areas require a VOC limit of less than 25 g/L. The SCAQMD Rule #1171 Compliant formula ensures you can use Brākleen® no matter where your business or home is located, while still providing the cleaning power and effectiveness for which CRC is famous. Like all non-chlorinated brake cleaners, it is flammable and should be used with caution. Use in a ventilated area and don’t forget to wear your gloves.

Effective Brake Cleaning
Brake systems parts are among the auto parts that require the most frequent cleaning. Grease, brake dust, fluid, and oils accumulate over time and can cause premature wear and lower brake performance. Brākleen® cleans and dries fast to remove contaminants from your parts and leaves no residue. The powerful formula restores brake performance and eliminates squeaks and squeals. It uses a carbon dioxide propellant and will not corrode components. It is designed for the ABS, brake disc, brake drum and cylinders, linings, calipers, brake shoes, clutch discs, brake pads, and more.

A Safer and Smarter Product
Using Brākleen® makes maintaining brake system parts simple. This ultra-low VOC formula comes in a 14-ounce aerosol can and is great for removing grease, brake fluid, oil, dust, and other buildup. Just spray from about two feet away and let the solvent do its job.Get rid of dirt, oils, grease, and other contaminants using CRC Brākleen® Brake Parts Cleaner SCAQMD #1171 Compliant formula. CRC is the #1 brand in brake cleaner worldwide, with years of experience providing safe, reliable products.

Download

Products Lainnya

Kennedy Hi-Grip, Flared/Phillips, Screwdriver Set, Set of 7

Featuring both flared and crosspoint screwdrivers, this 7 piece set of screwdrivers is suited for professional use. With hexagonal blades constructed from chrome vanadium steel and striking heads, each screwdriver is suitable for striking with a hammer to free up seized screws. Complete with a fully hardened magnetic tip and a comfortable moulded grip handle, the set is supplied in a display case.

Features and Benefits
• Chrome vanadium steel blades make for a roust product
• Fully hardened tips ensures a positive fit with fastenings
• Tips are magnetic to hold the screw in place making it easier to deliver accurate torque
• Comfortable moulded grip handle for user comfort and control
• Can be struck with a hammer to free up seized screws without damaging the tool

Typical Applications
• Electrical
• DIY
• Plumbing
• Automotive
• Construction

Kennedy-Pro Flat Head Screwdriver Slotted 5.5mm x 150mm

Chrome vanadium steel blades with magnetic tips. For parallel tipped screwdrivers, to safely drive these screws, the tip of the screwdriver should be of the same width as the slot in the screw head and fill it as well, to minimise slipping and deforming the screw head.

Features and Benefits
• Fitted with a unique dual grip triangular handle which has been designed for improved user comfort, allowing more torque to be applied
• With a convenient hanging hole in the handle for storage

Standards
• DIN ISO 2380

Thor 930g Copper Mallet, Plastic Shaft

With a head of 99.9% pure electrolytic copper and a resilient plastic handle, this mallet provides a firm, positive blow without the risk of damage to expensive components. Ideal for positive blows on highly finished or closely ground machined parts in the aircraft, automotive or shipping industries. Also used by tool and gauge makers. This mallet is not recommended for non-sparking applications

Features and Benefits
• Provides a strong blow without inflicting damages to the desired workpiece
• Plastic handle is highly robust and helps deliver firm blows
• Copper head is durable and resistant to wear and tear
• Faces can be replaced when necessary

Typical Applications
• Automotive
• Assembly
• Aircraft

Kennedy 110mm, Diagonal Cutting Pliers

Choose from bent nose, diagonal nippers, end cutting nippers, bent nose pliers, flat nose pliers, long nose or needle-nose pliers all in a miniature size to allow access in confined and restricted areas. Made from high-quality chrome-nickel steel with induction ground cutting edges, double-dipped PVC grips and a spring-loaded return, each set of pliers is designed to be used for delicate, fine and accurate work in a continuous production environment.

Features and Benefits
• Induction ground cutting edges hold a firm and precise edge even with extended use
• Double dipped PVC grip handles bolsters user control and overall comfort when using
• Spring loaded for user comfort and improved performance with a repetitive action
• Chrome nickel steel construction makes for a highly durable product
• Available in a range of sizes and specifications to suit your requirements
• Suited for hard to reach or confined areas

Typical Applications
• Construction
• DIY
• Electrical
• Engineering

CRC Brakleen® Brake Parts Cleaner, SCAQMD #1171 Compliant, 14 Wt Oz 05151

Informasi Pemesanan