Tools & Chemicals
Kennedy Manual Aviation Snips, Cut Right, Blade Chrome Vanadium
For use on mild steel or other non ferrous materials, these aviation snips cut from tight curves to straight. Available in both a left and right handed design, the product is manufactured from drop forged chrome vanadium steel with ground blades (54 - 58HRc). The double fulcrum compound action amplifies the pressure applied for easier cutting of up to 1.2mm cold rolled steel sheet. Each product also has a spring loaded, self-opening action for fast, effortless feed and single-handed operation. Complete with safety features such as anti-slip guards and a thumb lock that ensures the jaws stay closed when not in use.
Features and Benefits
• Available as either a left or right handed design to suit your handedness
• Drop forged chrome vanadium steel, ground blades offer durability and hold a good cutting edge even with extensive use
• Double fulcrum compound action amplifies the pressure applied for easier cutting
• Spring loaded, self-opening action allows for fast, effortless feed and single-handed operation
• Anti-slip guards offer extra safety when cutting
• Thumb lock ensures the jaws stay closed when not in use to avoid accidental cutting or injury
• PVC grip handles bolster user comfort, control and grip when using
Typical Applications
• Construction
• Engineering
• DIY
Features and Benefits
• Available as either a left or right handed design to suit your handedness
• Drop forged chrome vanadium steel, ground blades offer durability and hold a good cutting edge even with extensive use
• Double fulcrum compound action amplifies the pressure applied for easier cutting
• Spring loaded, self-opening action allows for fast, effortless feed and single-handed operation
• Anti-slip guards offer extra safety when cutting
• Thumb lock ensures the jaws stay closed when not in use to avoid accidental cutting or injury
• PVC grip handles bolster user comfort, control and grip when using
Typical Applications
• Construction
• Engineering
• DIY
Download
Products Lainnya
Comprised of a fully chromed all steel handle with thumb lever for reversing, this 1/2" square drive ratchet is suited for professional use. With a 72 tooth ratchet, it makes easy work of loosening and fastening nuts and bolts.
Features and Benefits
• Manufactured from steel for durability and resistance to wear and tear
• Chrome finish repels dirt and grime making it easier to clean
• Thumb lever allows for reversing without needing to detach the socket or accessory
Typical Applications
• Automotive
• Engineering
• DIY
• Construction
• Plumbing
• Electrical
Features and Benefits
• Manufactured from steel for durability and resistance to wear and tear
• Chrome finish repels dirt and grime making it easier to clean
• Thumb lever allows for reversing without needing to detach the socket or accessory
Typical Applications
• Automotive
• Engineering
• DIY
• Construction
• Plumbing
• Electrical
This product contains eight chrome molybdenum steel TX driver keys supplied on robust plastic clip. The simple design allows you to effectively keep all sizes together and readily available for use. The keys then conveniently fold up to a handy pocket size with penknife type storage. Finished with the wrench size stamped on clip and a black oxide finish on the keys.
Features and Benefits
• Folds up to save space in your toolbox
• Plastic clip keeps all 8 sizes together in one place for convenience
• Wrench size is stamped on the clip for ease of identification and selection of the right tool
• Drivers are manufactured from chrome molybdenum steel whilst the clip is constructed from durable ABS plastic for overall tool longevity
• With a black oxide finish to protect the drivers from corrosion as well as more general wear and tear
Typical Applications
• Construction
• DIY
• Engineering
Features and Benefits
• Folds up to save space in your toolbox
• Plastic clip keeps all 8 sizes together in one place for convenience
• Wrench size is stamped on the clip for ease of identification and selection of the right tool
• Drivers are manufactured from chrome molybdenum steel whilst the clip is constructed from durable ABS plastic for overall tool longevity
• With a black oxide finish to protect the drivers from corrosion as well as more general wear and tear
Typical Applications
• Construction
• DIY
• Engineering
With a 1/2" square drive, these vanadium steel bi-hexagonal sockets are the ideal product for working on hard to reach fastenings or more stubborn fastenings due to their 12 point design. Possessing a higher torque than normal sockets, this range of sockets can also effectively grip worn nuts and won't round off existing nuts. Finished with a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories.
Features and Benefits
• Side drive design gives a higher torque than regular sockets
• Ball retaining groove on each product ensures a positive fit with compatible accessories
• Manufactured from vanadium steel for durability
• Available in a variety of sizes to allow you to purchase the size that best suits your requirements
• Requires only a one-twelfth turn to engage the next point of the socket
Typical Applications
• Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including:
• Automotive
• Construction
• Agricultural
• Plumbing
Features and Benefits
• Side drive design gives a higher torque than regular sockets
• Ball retaining groove on each product ensures a positive fit with compatible accessories
• Manufactured from vanadium steel for durability
• Available in a variety of sizes to allow you to purchase the size that best suits your requirements
• Requires only a one-twelfth turn to engage the next point of the socket
Typical Applications
• Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including:
• Automotive
• Construction
• Agricultural
• Plumbing
With some products featuring both imperial and metric graduations and others metric only, this range of auto-locking tape measures is suited for general purpose to heavy duty uses. Featuring reverse printed, nylon-coated blades that are suited for measuring ceilings and windows, the blade is housed in an ABS plastic casing for bolstered resistance to impact. All models come with an automatic brake which locks the blade in position during use until you press the release control button. They also benefit from a sliding magnetic hook and belt clip.
Features and Benefits
• Reverse printed blades allow you to easily read measurements on both sides
• Automatic brake locks the blade in position until you press the release button for accurate measurements
• Belt clip allows you to attach the product to your person for safekeeping
• Available in a range of sizes and specifications to suit your needs
• Sliding magnetic hook allows you to attach the end to ferrous materials for precision measuring
Typical Applications
• Construction
• DIY
• Engineering
• Plumbing
• Electrical
Standards
•ECC Class II
Notes
• Some products have both metric and imperial graduations, others metric only. Always check the specifications before purchase
Features and Benefits
• Reverse printed blades allow you to easily read measurements on both sides
• Automatic brake locks the blade in position until you press the release button for accurate measurements
• Belt clip allows you to attach the product to your person for safekeeping
• Available in a range of sizes and specifications to suit your needs
• Sliding magnetic hook allows you to attach the end to ferrous materials for precision measuring
Typical Applications
• Construction
• DIY
• Engineering
• Plumbing
• Electrical
Standards
•ECC Class II
Notes
• Some products have both metric and imperial graduations, others metric only. Always check the specifications before purchase