Tools & Chemicals
Kennedy Cross Pein Hammer, 3-1/2oz., Wood Shaft, Waxed Shaft
Traditionally used by joiners and fitters, cross pein or Warrington hammers can be used for setting pins and nails prior to 'driving home' with the flat faced pein. With a close grained hardwood or hickory shaft shaped to comfortably fit in the hand, this range of Warrington hammers feature a forged steel head with ground and polished striking face.
Features and Benefits
• Hardwood and hickory shafts are ergonomically shaped for user comfort and control
• Forged steel head is highly resilient and stands up to extensive use
• Ground and polished striking face helps deliver solid and accurate blows
• Available in a range of sizes to suit your specific needs
Typical Applications
• Construction
• DIY
• Joinery
• Fitting
• Woodworking
Features and Benefits
• Hardwood and hickory shafts are ergonomically shaped for user comfort and control
• Forged steel head is highly resilient and stands up to extensive use
• Ground and polished striking face helps deliver solid and accurate blows
• Available in a range of sizes to suit your specific needs
Typical Applications
• Construction
• DIY
• Joinery
• Fitting
• Woodworking
Download
Products Lainnya
With a long reach handle and a high power, permanent magnet, this magnetic pick up tool is designed for easy pick-up and release of metal objects. It can be used for scrap and ferrous debris. Complete with a spring- loaded magnet release for easy disposal of debris.
Features and Benefits
• Permanent magnet never needs to remagnetised
• Spring loaded magnet release for easy discarding of the ferrous materials
• Long reach handle allows you to access awkward and hard to reach areas
Typical Applications
• Ideal for use in environments where debris and scattered pieces are a regular occurrence, but a safe and tidy workspace is required such as workshops, warehouses and building sites
Features and Benefits
• Permanent magnet never needs to remagnetised
• Spring loaded magnet release for easy discarding of the ferrous materials
• Long reach handle allows you to access awkward and hard to reach areas
Typical Applications
• Ideal for use in environments where debris and scattered pieces are a regular occurrence, but a safe and tidy workspace is required such as workshops, warehouses and building sites
Adjustable Combination Pliers
Serrated teeth with sliding pivot joint. Overall length: 203mm (8”).
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
Serrated teeth with sliding pivot joint. Overall length: 203mm (8”).
Spark-resistant tools are used to eliminate the chances of accidental fires or explosions in potentially combustible or explosive environments. They resist the sparks that a standard tool could potentially create when striking hard surfaces. The use of spark resistant tools is essential in many industrial applications such as petroleum and chemical manufacturing, spray booth operations, the marine industry, the mining industry, the paper industries, or any location where flammable vapours or combustible residues are present. Aluminium-bronze spark resistant safety tools are manufactured to 25HRC and offer a breaking strain of 75 - 85kgf/mm2.
Spark-resistant tools must be maintained with special care. Frequent cleaning/re-dressing to remove ferrous particles or contaminants, which may impair the spark-resistant properties, is essential.
- Long nose pliers with side cutter and gripping zones
- Certified to 1000 V AC, 1500 V DC
- 4 gripping points for pulling round objects with superior grip
- Certified to 1000 V AC, 1500 V DC
- 4 gripping points for pulling round objects with superior grip
Manufactured from High-Speed Steel (HSS), these power saw blades are recommended for cutting thin cross-sections such as tubing, small bars and light angle iron. Due to the thin nature of the blades, the product should be used only on light machines. Available in a range of sizes to suit your needs.
Features and Benefits
• Recommended for cutting thin cross-sections due to the accuracy of the blades
• High Speed Steel (HSS) construction makes fast and precise cuts for a smooth finish
• For cutting tubing, small bars and light angle iron for versatile use
• Should be used only on light duty machines
• Available in a range of sizes and specifications to suit your needs
Typical Applications
• DIY
• Automotive
• Plumbing
• Construction
Notes
• Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2in.)
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4in. to 3/4in.)
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16in. to 1in.)
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2in. to 1 1/2in.)
TPI: 4. Suitable for Section Width: 19mm and above (3/4in. and above)
Features and Benefits
• Recommended for cutting thin cross-sections due to the accuracy of the blades
• High Speed Steel (HSS) construction makes fast and precise cuts for a smooth finish
• For cutting tubing, small bars and light angle iron for versatile use
• Should be used only on light duty machines
• Available in a range of sizes and specifications to suit your needs
Typical Applications
• DIY
• Automotive
• Plumbing
• Construction
Notes
• Power Saw Hacksaw Blade Tooth Recommendations:
TPI: 18. Suitable for Section Width: up to 13mm (up to 1/2in.)
TPI: 14. Suitable for Section Width: 6 to 19mm (1/4in. to 3/4in.)
TPI: 10. Suitable for Section Width: 8 to 25mm (5/16in. to 1in.)
TPI: 6. Suitable for Section Width: 13 to 38mm (1/2in. to 1 1/2in.)
TPI: 4. Suitable for Section Width: 19mm and above (3/4in. and above)