Tools & Chemicals
Kengrip 1/4in. Drive, KenGrip Socket, 7mm, Metric, 6 Point
The Ken-Grip® 1.4in square drive sockets offer a new standard of performance with the ability to grip up to 95% of a rounded fastener. It has a unique patented design that grips even worn and rusted fasteners without damaging them and can be used on a wide range of fasteners, including non-metric hexagons and E-Torx Drive sizes. Double knurl feature gives a high grip which is essential for quick tool change when hands are greasy or oily. Manufactured from chrome vanadium steel, the sockets and accessories are aluminium free and fully chrome plated for an easy clean finish.
Features and Benefits
• Grips fasteners which are up to 95% rounded off for versatility of use
• Will not damage even worn or rusted fasteners for safe use every time
• Also fits a wide range of non-metric Hexagons and E-Torx® Drive Sizes allowing you to use the product in a wider scope
• Fully chrome plated finish for easy clean
• Unique 'Double-Knurl' design for high grip even when fingers are oily or greasy
• Aluminium-free finish for non-sparking action
• Available in a variety of metric sizes to suit your needs
Typical Applications
• DIY
• Engineering
• Plumbing
• Construction
Standards
• Conform to DIN3124
Features and Benefits
• Grips fasteners which are up to 95% rounded off for versatility of use
• Will not damage even worn or rusted fasteners for safe use every time
• Also fits a wide range of non-metric Hexagons and E-Torx® Drive Sizes allowing you to use the product in a wider scope
• Fully chrome plated finish for easy clean
• Unique 'Double-Knurl' design for high grip even when fingers are oily or greasy
• Aluminium-free finish for non-sparking action
• Available in a variety of metric sizes to suit your needs
Typical Applications
• DIY
• Engineering
• Plumbing
• Construction
Standards
• Conform to DIN3124
Download
Products Lainnya
With an accuracy of 1m/m, these boat levels are ideal for use by professionals such as scaffolders. Manufactured from die cast aluminium with a powder coated finish, each product has a milled measuring face for improved accuracy. With 1 vertical and 1 horizontal vial for normal and upside down measuring, the product can be purchased with a regular or a magnetic base. Supplied with a leather belt pouch.
Features and Benefits
• Possesses a milled measuring face for optimum measuring accuracy
• Both models have two vials with vertical and horizontal viewing positions for versatility
• Supplied with a leather belt pouch for you to effectively store and transport your tool
• Magnetic base allows you to attach the product to a ferrous material for additional stability when measuring (product KEN5100160K only)
• Die cast aluminium body with a powder coat finish makes for a highly robust product
Typical Applications
• Woodworking
• DIY
• Constrution
Features and Benefits
• Possesses a milled measuring face for optimum measuring accuracy
• Both models have two vials with vertical and horizontal viewing positions for versatility
• Supplied with a leather belt pouch for you to effectively store and transport your tool
• Magnetic base allows you to attach the product to a ferrous material for additional stability when measuring (product KEN5100160K only)
• Die cast aluminium body with a powder coat finish makes for a highly robust product
Typical Applications
• Woodworking
• DIY
• Constrution
Manufactured from hardened carbon steel with a dual material 'T' handle grip for comfort and extra force, these metric hexagon ball drivers are suited for assembly and maintenance work. The ball drivers can be used at angles of up to 30° for use where access is restricted and the shorter hexagon end is ideal for use when greater tightening torque is required. The long arm end is ball drive and the short arm end is plain. With a black oxidised finish and available in a range of sizes.
Features and Benefits
• Black oxidised finish protects against corrosion
• Dual material grip bolsters control and user comfort
• 'T' handle allows you to apply maximum torque
• Short end allows you to work in restricted and confined areas
• Hardened carbon steel blade is durable and resilient
• Available in a variety of sizes to suit your requirements
Typical Applications
• Bicycle Repair and Maintenance
• Furniture Assembly
Standards
• ISO2936
• DIN911
Features and Benefits
• Black oxidised finish protects against corrosion
• Dual material grip bolsters control and user comfort
• 'T' handle allows you to apply maximum torque
• Short end allows you to work in restricted and confined areas
• Hardened carbon steel blade is durable and resilient
• Available in a variety of sizes to suit your requirements
Typical Applications
• Bicycle Repair and Maintenance
• Furniture Assembly
Standards
• ISO2936
• DIN911
These external circlip pliers possess a 90° angled jaw to effectively remove and place external circlips. Available in three varying sizes, each pair of pliers is constructed from industrial quality chrome vanadium steel that has been hardened and tempered and has PVC cushion grip handles. Coil sprung to aid operation.
Features and Benefits
• Industrial quality chrome vanadium steel construction that has been hardened and tempered for ultimate durability
• PVC cushion grip handles bolster user comfort, grip and control for accuracy
• Coil sprung to aid operation and reduce user hand fatigue even with repetitive action
• Available in three sizes and specifications to suit your requirements
Typical Applications
• Engineering
• Automotive
Features and Benefits
• Industrial quality chrome vanadium steel construction that has been hardened and tempered for ultimate durability
• PVC cushion grip handles bolster user comfort, grip and control for accuracy
• Coil sprung to aid operation and reduce user hand fatigue even with repetitive action
• Available in three sizes and specifications to suit your requirements
Typical Applications
• Engineering
• Automotive
Set of 4 engineer's files fitted with ergonomically designed handles for a comfortable improved grip. Files are manufactured from T12 carbon steel, hardened and tempered to ensure a long lasting tool. Supplied in a woven wallet for easy storage.
Standards Met
• Manufactured to BS498:1990 and American Federal Standard GGG-F325B.
Features and Benefits
• Ergonomic grip with anti-slip finger placement pads ensures the tool stays tight and comfortable in your hand
• Lanyard hole in handle for extra protection when working at height
• Second cut teeth for quick and efficient removal of moderate material
• Woven wallet designed for easy removal and storage
Notes
• Sets available in 6"" (150mm), 8" (200mm) and 10" (250mm) versions
• Set contains Hand, Flat, Round and Half Round second engineer's files
Standards Met
• Manufactured to BS498:1990 and American Federal Standard GGG-F325B.
Features and Benefits
• Ergonomic grip with anti-slip finger placement pads ensures the tool stays tight and comfortable in your hand
• Lanyard hole in handle for extra protection when working at height
• Second cut teeth for quick and efficient removal of moderate material
• Woven wallet designed for easy removal and storage
Notes
• Sets available in 6"" (150mm), 8" (200mm) and 10" (250mm) versions
• Set contains Hand, Flat, Round and Half Round second engineer's files