Pump & Lubricants
Discflo Cantilever
Cantilever pumps are ideal for moving abrasive materials and slurries, as only a portion of the pump is located under the fluid. The seals, bearings, bushings, and suction check valves are all outside of the liquid, preventing the material from degrading or interfering with them.
Our cantilever pumps are designed by our engineering team that specializes in handling the toughest pumping jobs. They set the standard for pumping slurries and abrasive materials.
Our cantilever pumps are designed by our engineering team that specializes in handling the toughest pumping jobs. They set the standard for pumping slurries and abrasive materials.
Download
Products Lainnya
This 1/8" BSP threaded, 4 jaw hydraulic connector is an effective way of allowing for the controlled flow of lubricants. Securely fastens the grease nipple when in use to ensure minimal slippage.
Features and Benefits
• Manufactured from steel for durability
• Securely grips the grease nipple while in use to control the flow of the lubricant
• Textured in places for easy gripping even with oily or greasy hands
Typical Applications
• Automotive
• Engineering
• Mechanics
Features and Benefits
• Manufactured from steel for durability
• Securely grips the grease nipple while in use to control the flow of the lubricant
• Textured in places for easy gripping even with oily or greasy hands
Typical Applications
• Automotive
• Engineering
• Mechanics
For use with Kennedy grease guns and all other hydraulic grease equipment.
Hot dip protective plastic coating moulds around the component or tool to provide 100% coverage and protect against impact and corrosion.
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
Features and Benefits
• Hot dip plastic coating moulds itself around the part to provide 100% coverage and protect against corrosion and impacts for up to ten years
• Easy part identity through the translucent coating
• Simple to remove by peeling off
• Once removed, leaves behind a thin oil film to provide short term protection against corrosion
• Removed coatings may be reused saving cost
Notes
• Each single block measures (L)-150mm (H)-50mm (W)-80mm
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
Warnings
• Never directly apply heat to melt the protective dip
• Always use with a suitable melting pot
With a comfortable lever grip and offset nozzle, this chrome plated steel lever gun has a 500cc lever and is suited to 400g grease cartridges. Supplied with a flexible rubber hose and suited for medium to heavy greases.
Features and Benefits
• Includes a flexible rubber hose to allow you to begin working immediately
• Manufactured from steel for durability and resilience
• Rubber grip around the lever for comfort and grip when administering lubricants
Typical Applications
• Suited for controlled lubrication of medium and heavy greases to your desired work piece
Features and Benefits
• Includes a flexible rubber hose to allow you to begin working immediately
• Manufactured from steel for durability and resilience
• Rubber grip around the lever for comfort and grip when administering lubricants
Typical Applications
• Suited for controlled lubrication of medium and heavy greases to your desired work piece