Pump & Lubricants
Moresco Metal Working Fluids
Cutting fluids are used when metals or similar materials are cut and made into finished products by machine tools such as lathes, machining centers, and grinding machines. MORESCO is developing cutting fluids that have long service lives, which reduces the amount of waste fluid that is generated and thereby contributes to environmental improvements.
Toolmate Waterbase
BS-33 (Biostatic Types) : Machining of aluminum and steel.
GR-2 (Biostatic Types) : Precision grinding, Efficient grinding of steel, and special metals.
Toolmate Oilbase
NN Series : Inactive oil-based cutting oil. There is no discoloration such as copper · brass etc. We have variety types from low to high viscosity.
NA Series : Active type of oil-based cutting oil. It has great processability for iron based workpieces. We have variety types from low to high viscosity.
Toolmate Waterbase
BS-33 (Biostatic Types) : Machining of aluminum and steel.
GR-2 (Biostatic Types) : Precision grinding, Efficient grinding of steel, and special metals.
Toolmate Oilbase
NN Series : Inactive oil-based cutting oil. There is no discoloration such as copper · brass etc. We have variety types from low to high viscosity.
NA Series : Active type of oil-based cutting oil. It has great processability for iron based workpieces. We have variety types from low to high viscosity.
Download
Products Lainnya
For use with Kennedy grease guns and all other hydraulic grease equipment.
RP250
Used for dispensing lubricants and disel, this cast iron pump with a steel suction tube and spout is the easy way to control the flow of said liquids. Suitable for container size of 200 litres, the pump possesses an inlet of 2" BSP and M59 x 5 male thread.
Features and Benefits
• Cast iron pump with steel suction tube and spout making for a hardy product
• Suited for use on a 200 lite capacity barrel
• With a 980mm tube to easily dispense liquids when necessary
Typical Applications
• Suited for controlling the flow of fluids in a 200 litre barrel
Used for dispensing lubricants and disel, this cast iron pump with a steel suction tube and spout is the easy way to control the flow of said liquids. Suitable for container size of 200 litres, the pump possesses an inlet of 2" BSP and M59 x 5 male thread.
Features and Benefits
• Cast iron pump with steel suction tube and spout making for a hardy product
• Suited for use on a 200 lite capacity barrel
• With a 980mm tube to easily dispense liquids when necessary
Typical Applications
• Suited for controlling the flow of fluids in a 200 litre barrel
NEOVAC is well-known as a synonym for high quality vacuum pump oil. We have received endorsements of NEOVAC as the oil used by many vacuum pump manufacturers due to the high level of trust placed in NEOVAC's performance. NEOVAC is used in vacuum equipment in applications such as semiconductors, silicon wafers, vacuum deposition, heat treatment, and packaging and contributes to productivity improvements.
NEOVAC MR Series
Rotary pump vacuum oil is used with the purposes of lubrication and the preservation of airtight seals. It has a low steam pressure, suitable viscosity, and is difficult to emulsify (it has anti-emulsification properties). In other words, it easily separates from water and removes water.
MR-100 : Standard for small pump
MR-200 : Standard for small pump
MR-250 : Standard for small pump
MR-200A : Improved heat and oxidation. Moisture suction is supported
MR-250A : Improved heat and oxidation. Moisture suction is supported. For large pump
NEOVAC SX & SY
Diffusion pump vacuum oil is sprayed either as molecules or as a steam and is used to obtain a vacuum state. It is necessary for these oils to be chemically stable such as by having low steam pressures, by not being transformed due to heat (heat resistance), and by not reacting easily with oxygen (oxidation resistance).
SX : For surface treatment equipment. (vapor deposition, sputter, heat treatment)
SY : For surface treatment equipment. (vapor deposition, sputter, heat treatment)
NEOVAC MR Series
Rotary pump vacuum oil is used with the purposes of lubrication and the preservation of airtight seals. It has a low steam pressure, suitable viscosity, and is difficult to emulsify (it has anti-emulsification properties). In other words, it easily separates from water and removes water.
MR-100 : Standard for small pump
MR-200 : Standard for small pump
MR-250 : Standard for small pump
MR-200A : Improved heat and oxidation. Moisture suction is supported
MR-250A : Improved heat and oxidation. Moisture suction is supported. For large pump
NEOVAC SX & SY
Diffusion pump vacuum oil is sprayed either as molecules or as a steam and is used to obtain a vacuum state. It is necessary for these oils to be chemically stable such as by having low steam pressures, by not being transformed due to heat (heat resistance), and by not reacting easily with oxygen (oxidation resistance).
SX : For surface treatment equipment. (vapor deposition, sputter, heat treatment)
SY : For surface treatment equipment. (vapor deposition, sputter, heat treatment)
Glass lining is a proven technique for adding a super-durable, smooth, non-stick surface to metal equipment and components.
Discflo glass lined pumps use the dual-coat glass-lining process developed by Vitco, of PA. The glass lining is a mix of fine borosilicate glass, water, and clay, applied to the base metal substrate at high temperature. Vitco’s dual-coat process allows for extra durability and longevity as the base coat forms a strong bond with the base metal and the cover coat provides the non-stick characteristics.
Discflo glass lined pumps use the dual-coat glass-lining process developed by Vitco, of PA. The glass lining is a mix of fine borosilicate glass, water, and clay, applied to the base metal substrate at high temperature. Vitco’s dual-coat process allows for extra durability and longevity as the base coat forms a strong bond with the base metal and the cover coat provides the non-stick characteristics.