NEOVAC is well-known as a synonym for high quality vacuum pump oil. We have received endorsements of NEOVAC as the oil used by many vacuum pump manufacturers due to the high level of trust placed in NEOVAC's performance. NEOVAC is used in vacuum equipment in applications such as semiconductors, silicon wafers, vacuum deposition, heat treatment, and packaging and contributes to productivity improvements.

NEOVAC MR Series

Rotary pump vacuum oil is used with the purposes of lubrication and the preservation of airtight seals. It has a low steam pressure, suitable viscosity, and is difficult to emulsify (it has anti-emulsification properties). In other words, it easily separates from water and removes water.

MR-100 : Standard for small pump
MR-200 : Standard for small pump
MR-250 : Standard for small pump
MR-200A : Improved heat and oxidation. Moisture suction is supported
MR-250A : Improved heat and oxidation. Moisture suction is supported. For large pump

NEOVAC SX & SY

Diffusion pump vacuum oil is sprayed either as molecules or as a steam and is used to obtain a vacuum state. It is necessary for these oils to be chemically stable such as by having low steam pressures, by not being transformed due to heat (heat resistance), and by not reacting easily with oxygen (oxidation resistance).

SX : For surface treatment equipment. (vapor deposition, sputter, heat treatment)
SY : For surface treatment equipment. (vapor deposition, sputter, heat treatment)

Hot dip strippable plastic coating moulds itself around the component or tool to provide 100% coverage and protect against corrosion and impacts for up to ten years. The protected component can be easily identified through the translucent coating. Simply removed by peeling it off, leaves behind a thin oil film to provide short term protection against corrosion. The removed protective dip can be reused.

Features and Benefits
• Easily moulds around tools and components
• Offers 100% coverage for effective protection against corrosion and impacts
• Long lasting protects for up to 10 years
• Components are easily identifiable thanks to the translucent coating
• Working temperature 130°C to 160°C (for optimum results 140°C to 145°C)
• Reusable for a cost effective solution

Notes
• Each block measures (L)-150mm (H)-50mm (W)-80mm.
• Block weight - 0.50kg

Warning
• Never directly apply heat to melt the protective dip, always use with a suitable melting pot.

Glass lining is a proven technique for adding a super-durable, smooth, non-stick surface to metal equipment and components.

Discflo glass lined pumps use the dual-coat glass-lining process developed by Vitco, of PA. The glass lining is a mix of fine borosilicate glass, water, and clay, applied to the base metal substrate at high temperature. Vitco’s dual-coat process allows for extra durability and longevity as the base coat forms a strong bond with the base metal and the cover coat provides the non-stick characteristics.

For use with Kennedy grease guns and all other hydraulic grease equipment.