Pneumatic Tools
Kobe Red Line NS4030, Needle Scaler, Air, Straight, 4000bpm, 1/4in Air Inlet Size
The NS4030 straight air needle scaler is a heavy duty chipping hammer perfect for industrial and production applications.
Features and Benefits
• 10 needles for quick removal of rust, paint, scale, flux and corrosion
• Compact for great accessibility for hard to reach areas
• Slimline body for one hand operation
• Front exhaust helps remove debris and scale from the work area
Typical Applications
• Ideal for surface clean-up work
• Great for rust removal on chassis
• Quick removal of rust,paint, scale, weld flux and corrosion
Features and Benefits
• 10 needles for quick removal of rust, paint, scale, flux and corrosion
• Compact for great accessibility for hard to reach areas
• Slimline body for one hand operation
• Front exhaust helps remove debris and scale from the work area
Typical Applications
• Ideal for surface clean-up work
• Great for rust removal on chassis
• Quick removal of rust,paint, scale, weld flux and corrosion
Download
Products Lainnya
IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.
Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.
Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.
Connector to Female Parallel
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Bulkhead to Female Parallel
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
This straight die grinder kit includes a straight die grinder with 3 and 6mm collets, collet spanner, 10 assorted mounted points and robust blow moulded case. The die grinder is suitable for polishing, buffing and grinding. Boasting a robust and durable single piece aluminium body, a 1/2hp motor and precision balanced bearings to provide reliability in the most demanding of industrial/automotive applications. Finished with a trigger that has a safety catch to prevent accidental starts.
Features and Benefits
• Comprehensive kit ensures you have the right piece to hand
• Manufactured from durable aluminium for product longevity
• Safety catch on the trigger to prevent accidental starting
• Supplied in a robust, blow moulded case to store and transport your tool
Contents
• 2 x Collet Spanners
• Straight Die Grinder
• 1 x 3mm Collet
• 1 x 6mm Collet
• 10 x Assorted Mounted Points
Typical Applications
• Suitable for polishing, buffing and grinding in industrial and automotive settings
Features and Benefits
• Comprehensive kit ensures you have the right piece to hand
• Manufactured from durable aluminium for product longevity
• Safety catch on the trigger to prevent accidental starting
• Supplied in a robust, blow moulded case to store and transport your tool
Contents
• 2 x Collet Spanners
• Straight Die Grinder
• 1 x 3mm Collet
• 1 x 6mm Collet
• 10 x Assorted Mounted Points
Typical Applications
• Suitable for polishing, buffing and grinding in industrial and automotive settings