This impact wrench series designed for tight applications and is highly recommended. Its rocking dog impact mechanism and metal motor housing offer high durability. High productivity is ensured with a torque of 90 ft.lbs / 122 Nm.

B7444 - Suitable for production and assembly applications. Twin hammer mechanism. 1/2" square drive. Three position dial style speed regulator. Forward/reverse selection. Ergonomic and comfortable handle grip. Fixed inlet and exhaust.
Forward: position 1: 4000rpm, position 2: 5000rpm, position 3: 7000rpm.
Reverse: position 1: 3000rpm, position 2: 5000rpm, position 3: 7000rpm.
Square : 1/2"
Maximum torque: 813Nm
Recommended air pressure: 6.2bar/90psi.
Air consumption:(113ltr/min).
Air inlet thread: 1/4" NPT.
Minimum air hose size (ID): 10mm (3/8").

*Based on a 15 second cycle per minute average use.

Branch Tee to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

The CP7755 Series 1/2" impact wrench allows operators to select the right power with 11 settings in forward on its innovative adjustable power control. The hose is no longer an issue thanks to the integrated pneumatic flex mini pneumatic inlet. The series delivers reverse torque up to 960 ft.lbs. Available in 4 models: 1/2" short anvil with pneumatic Flex mini, 1/2" long anvil with pneumatic Flex mini, 1/2" short anvil without pneumatic Flex mini and 1/2" long anvil without pneumatic Flex mini.