This professional, straight air die grinder possesses a high specification that offers improved user comfort and maximum durability. This versatile air grinder is suitable for use with a wide range of abrasive stones and carbide burrs. With a compact design it is well suited to working in confined spaces and is best used to deburr, polish, blend and grind imperfections. Supplied with two collet spanners.

Features and Benefits
• Designed for continuous use
• 60mm short body Length allows better access to more confined areas
• Planetary gears for longer life and smoother running
• Low profile teasing throttle for precise speed control
• Rotating air inlet to prevent the air hose from tangling
• Vibration dampened rubber body provides improved user grip and comfort over longer periods of use

Typical Applications
• For use when grinding, deburring, buffing and polishing as well as cleaning and smoothing weld seams and castings
• Recommended for use with Tungsten Carbide Burrs, Mounted Points, Flap Wheels and Abrasive Bands

Notes
• Always ensure that the speed of the air tool never exceeds the maximum operating speed of the consumable

IWS100X - 1" square drive. Suitable for industrial and commercial production and assembly applications. Side handle for two-handed operation. Top mounted spring balance loop. Easy to use forward/reverse switch and three position power regulator. Top venting exhaust. Oiling points for daily maintenance.

Bolt Capacity: M33
Working torque: 2,030 Nm
Maximum torque: 2,300Nm
Safe working pressure: 6.2bar / 90psi.
Air inlet thread: 1/2" NPT.
Minimum air hose size (ID): 1/2" (13mm).
Air pressure: 6.3bar/90 psi.
Air consumption: 7.0 cfm.
Sound pressure level: 96 dBA.
Sound power level: 101.67 dBA.
Vibration level: 6.0 m/s².
Overall length: 448mm.

Increased robustness thanks to the powerful 1-1/2" impact wrench, designed with oil bath twin hammer clutch mechanism, aluminium body, and clutch housing. With a maximum reverse torque of up to 3,900 Nm / 2,875 ft.lb., the CP6930-D35 is the ideal solution for maintenance applications. It is reversible and its steel trigger allows makes it easy to use in the bolting phases. The CP6930-D35 is equipped with a hole socket retainer for maximum safety.

Connector to Male Taper


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.