kategori Products
BRAND
FlukeKennedyMilwaukeeMakitaYorkBottKobe3MSealeyFlexovitSherwoodGranlundDragerGysSitesafeMatlockSenatorSuper StrengthChicago PneumaticPanasonicYamotoKennedy-ProSummitechWD 40KengripSwissBurrEdisonSolent Spill ControlKennedy Red-Hot-DipKobe Blue LineKobe Red LineHaloTuffsafeIndexaAvonYamaloyCotswoldSwisstechAtlas WorkhokdersThorOxfordRutlandCheetahMaster LockESABCIGWELDMorescoDiscfloCRCMSASiemensSchneiderDR OSHA
Products
Category Product
FC07 - Engineers Stud
Material: Medium Carbon Steel.
Hardness: HRC 30 - 35.
Surface Finish: Black Oxide.
Material: Medium Carbon Steel.
Hardness: HRC 30 - 35.
Surface Finish: Black Oxide.
Dräger X-plore® 1900 is a high-performance, single-use dust mask for protection against fine dust and particles. The premium particle filtering mask is available in two sizes, combining ease of use, exceptional comfort and optimal fit. For the highest degree of safety – even for people wearing spectacles.
'Y' Reducers
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Second Cut Needle File Set.
Features and Benefits
• Supplied in PVC Wallet
• Use for fine filing, polishing and finishing jobs
• For soft and hard metals
• Non-slip grip handle
Standards Met
• Manufactured to BS 498:1990
Contents (1 of each)
• Hand, Flat, Knife, Round, Half Round, Square, Three Square, Crossing, R/Edge Joint, Slitting, Warding, Barrette
Features and Benefits
• Supplied in PVC Wallet
• Use for fine filing, polishing and finishing jobs
• For soft and hard metals
• Non-slip grip handle
Standards Met
• Manufactured to BS 498:1990
Contents (1 of each)
• Hand, Flat, Knife, Round, Half Round, Square, Three Square, Crossing, R/Edge Joint, Slitting, Warding, Barrette
Offering a solution to finishing problems where material hardness makes conventional files ineffective, this 6 piece file set has a diamond powder coated finish. Each file can be used on tungsten carbide, ceramics, carbon, glass, fibreglass and hardened steels such as stainless steel, nimonics and titanium for excellent versatility.The product is plated with finely selected diamond powder 120/140 grain and is supplied in a PVC wallet.
Features and Benefits
• Supplied in a PVC wallet to keep your tools secure and protected
• Finely selected diamond powder coating makes for extremely precise results when filing
• Can be used on a wide range of materials including tungsten carbide, ceramics, glass, hardened steels and carbon for versatility of use
• 6 piece set ensures you have the right shape and size file for your needs
• Non-slip grip handle bolsters user control and comfort
Contents
• 1 x Hand File
• 1 x Half Round File
• 1 x Three Square File
• 1 x Round File
• 1 x Square File
• 1 x Knife File
Typical Applications
• Construction
• Metal Worksing
• Automotive
Features and Benefits
• Supplied in a PVC wallet to keep your tools secure and protected
• Finely selected diamond powder coating makes for extremely precise results when filing
• Can be used on a wide range of materials including tungsten carbide, ceramics, glass, hardened steels and carbon for versatility of use
• 6 piece set ensures you have the right shape and size file for your needs
• Non-slip grip handle bolsters user control and comfort
Contents
• 1 x Hand File
• 1 x Half Round File
• 1 x Three Square File
• 1 x Round File
• 1 x Square File
• 1 x Knife File
Typical Applications
• Construction
• Metal Worksing
• Automotive
The Kennedy® variable pitch hole saws deliver high quality holes in a range of materials, including wood, steel, brass, bronze, and cast iron. The M3 HSS cutting teeth aggressively cut to give a very smooth finish with little to no tear out.
Features and Benefits
• Cuts up to 40% faster than constant pitch saws
• Varying tooth pitch disrupts harmonics to substantially reduce noise
• Tooth life is extended when used in conjuction with a cordless drill
Typical Applications
• Construction
• Engineering
• Maintenance
Notes
• 4-6 teeth per inch
• 28.5mm (11/8") cutting depth
Features and Benefits
• Cuts up to 40% faster than constant pitch saws
• Varying tooth pitch disrupts harmonics to substantially reduce noise
• Tooth life is extended when used in conjuction with a cordless drill
Typical Applications
• Construction
• Engineering
• Maintenance
Notes
• 4-6 teeth per inch
• 28.5mm (11/8") cutting depth
With heavy duty one-piece moulded insulation sheaths covering both blade and transparent plastic handle for extra protection and safety. Will detect 'live' electricity supply. Suitable for AC to 125 - 250V. 3mm wide tip. Conforms to DIN VDE 0680 part 6:1977-04.
A perfect combination: modern design and light weight offer you extra protection and comfort. Choose from the low-maintenance, cost-effective Dräger X-plore® 3300 half mask or Dräger X-plore® 3500 version for long lasting protection under tough conditions.
150 grain (medium grade) diamond needle file set, with tapered handles. Suitable for light duty and workshop use.
Features and Benefits
• High quality construction
• Supplied in PVC wallet
Contents: hand, half round, three square, round, square and knife
Features and Benefits
• High quality construction
• Supplied in PVC wallet
Contents: hand, half round, three square, round, square and knife
'Y' Reducers
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.
Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.
This range of metric thread repair inserts includes 1xD, 1.5xD and 2xD lengths (ISO Metric threads). Our quality inserts are now supplied in packs of 10 or 50.
Features and Benefits
• Available in packs of 10 or 50 depending on your selection
• Easy and effective way of repairing threads
• Available in a range of sizes to suit your needs
Typical Applications
• Construction
• Automotive
• Engineering
Features and Benefits
• Available in packs of 10 or 50 depending on your selection
• Easy and effective way of repairing threads
• Available in a range of sizes to suit your needs
Typical Applications
• Construction
• Automotive
• Engineering
A perfect combination: modern design and light weight offer you extra protection and comfort. In addition, the X-plore® 3x50 half mask series was especially designed to provide a close fit and a secure seal for Asian faces. Choose from the low-maintenance, cost-effective Dräger X-plore® 3350 half mask or Dräger X-plore® 3550 version for long lasting protection under tough conditions.