Products

• An easy to use interlocking system with no nuts or bolts that's quick and easy to erect
• Incredible strength and rigidity
• 5 adjustable height shelves
• Hammerite finish powder coated uprights offer greater durability
• Hardwearing and long lasting

KLF010
Eco friendly COB LED boasts low power consumption, 90% energy saving when compared with ordinary floodlights. Supplied with steel stand and has an adjustable head to light up out of reach areas. Beam angle of 120°. Aluminium die-cast alloy body with stainless steel external fixings and toughened glass. Suitable for outdoor use with IP65 rating. 2 chargers included (12V & 240V) along with 4 types of universal international plug adaptors. 5 hours charging time.

Features and Benefits
• Eco friendly 10W COB LED equivalent to 100W halogen
• Steel stand and an adjustable head to light up out of reach areas
• Beam angle of 120°
• Aluminium die-cast alloy body with stainless steel external fixings and toughened glass
• Suitable for outdoor use with IP65 rating. Two chargers included (12V & 240V) along with 4 types of universal international plug adaptors

Technical Information
• Dimensions (H x W x D): 250 x 145 x 165mm.

Comprises of 2 lights - COB as lamp and 7 LED lights on the top. Magnetic base and back, x2 360˚ swivel and foldaway hanging hooks. IP20. Operating time: 2 - 2.5 hrs (high mode), 4 - 4.5 hrs (low mode), 10 hrs (top LEDs). Charge time: 4 - 5 hrs.

Features and Benefits
• Ultra-bright for enhanced luminosity
• Efficient yet effective
• Foldaway hanging hooks for convinience

Notes
• 320 Lumens
• Run time: up to 2.5hrs (high mode COB)
• Run time: up to 4.5hrs (low mode COB)
• Run time: up to 10 hrs (top LEDs)
• Max. charging time: 5hours
• IP20

The Fluke 393 FC CAT III 1500 V True-rms Solar Clamp Meter with iFlex is designed for solar photovoltaic (PV) installation technicians and maintenance professionals who work in high voltage DC environments: PV arrays, wind power, electric railways, data centers battery banks for uninterruptible power supplies. The clamp meter will measure up to 1500 V DC and 1000 V AC with test leads, and up to 999.9 A DC or AC through the clamp jaw. The included iFlex flexible current probe extends AC current measurements up to 2500 A. The 393 has a thin jaw, giving you access to cables in crowded combiner boxes. Plus, the test leads are designed with your work in mind, and are also rated to CAT III 1500 V DC.



Key functions of the solar clamp meter:

- IP54 rated, ideal for work outdoors including PV panel testing

- DC power measurement, showing readings in kVA

- Audio Polarity indicator helps prevent accidental miswires

- Visual Continuity provides a bright green light in the display, ideal when working in dark and noisy environments

- Logging and reporting of test results via Fluke Connect software

- When measuring ac current the included iFlex flexible current probe gives you unparalleled access to cable is tight spaces. The iFlex probe can be twisted through extremely small spaces and provide accurate current measurements.



The world's first CAT III 1500 V true-RMS solar clamp meter

Cylindrical-End Cutting
All sizes are nominal with a 6mm shank unless other wise stated.

Cut Numbers:

Cut 3 - Rapid Cut.
for use on softer non ferrous and plastic materials, i.e aluminium, fibreglass, plastics, hard rubber and zinc alloy,

Cut 6 - Double Cut.
Crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.

Please note:
• Work piece and tools should always be steady and well supported.
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.

High-quality 'A' Shape Mounted Points - with a Shank Diameter of 6mm.

Features and Benefits
• All points are aluminium oxide with 'rubenite™' as standard, providing vastly improved durability & reliability
• Available in a wide range of shapes and sizes to suit every need

Typical Applications
• Suitable for portable die and straight hand grinders
• For all general purpose grinding and deburring on steels and most metals

Notes
• Shank diameters are metric as listed below with inch sizes available on request
• Maximum speeds are quoted assuming that collet to back of point does not exceed 12.7mm (1/2") and are for guidance only

Gembok Travel dengan Lebar 1-3/16in (30mm), Atur Kombinasi Anda Sendiri. Diterima TSA dengan Shackle Fleksibel

Fitur Produk:
• Mengizinkan pemeriksa oleh TSA untuk memeriksa dan mengunci kembali bagasi, tanpa merusak kuncinya
• Diakui di 29 negara secara global
• Kabel fleksibel yang unik mencegah penyalahgunaan dari peralatan penanganan bagasi
• Mudah untuk diatur & mengatur ulang kombinasi numerik
• Body logam 1-3/16in (30mm) yang tahan lama
• Keamanan kombinasi 3 dial untuk kenyamanan tanpa kunci
• Lebar Body: 1-3/16in (30mm)
• Dimensi keseluruhan A: 1/8in (3mm) B: 1-1/2in (38mm) C: 5/8in (16mm)

Product Details
A range of long lasting synthetic filament paint brushes specifically designed for the professional. Designed with the purpose of achieving very fine finishes with all paints, these brushes are available in a range of sizes from 1/2" to 4". Each product also features a cushioned rubber grip handle.

Features and Benefits
• Cushioned rubber grip handles increase user comfort and bolster grip quality
• Synthetic filaments are hard wearing and long lasting
• Leaves a professional finish with a smooth profile
• Available in a range of sizes to ensure you find the correct size for your needs

Typical Applications
• Ideal for use with all paints and specifically suited for painters, decorators, construction workers and DIY enthusiasts to leave a professional finish

These 5 Shelf quick assembly units are ideal for industrial or institutional use. Quick and easy to erect with no nuts or bolts necessary, the product is available with either 175kg (chipboard) or 265kg (MDF) shelf capacities. Tested and certified to European GS standards, each product is complete with 5 shelves with strong uprights and beam profiles, finished in high quality epoxy powder coated paint.

Features and Benefits
• Each product possesses 5 shelves to ensure ample storage space
• Available in varying sizes with either MDF shelves with 265kg capacity or Chipboard shelves with 175kg capacities
• Quick assembly design includes no nuts or bolts for user ease
• Finished in epoxy powder coat paint for bolstered resistance to corrosion and aesthetic pleasure
• Strong uprights and beam profiles make for a robust product

Typical Applications
• Institutional
• Workshops
• Industrial

Standards
• Tested and certified to European GS standards

Simple, tap together, fully adjustable shelving for quick and economic storage solutions. Take a standard bay and tailor it to your needs by adding shelf levels. Quickrack Shelving maximises the storage of archive boxes, box files, arch files and many packaged stock items.

Five or six shelf units with 18mm chipboard decks. Bays comprise four uprights, five or six shelf levels with J-beams, feet and assembly instructions. Bays will be supplied with red uprights and light grey beams unless specified otherwise.
Maximum bay load for bays 1980mm high - 2000kg UDL.
Maximum bay load for bays over 1980mm high -
1500kg UDL.

Simple tap-together construction.
No fiddly nuts and bolts.
Bays assembled within ten minutes.
Unpack and assemble the framework by simply tapping together...with the framework complete, just drop the shelves into position.
Contents not included.

UK Manufactured

Images are for illustration purposes only

Now there is one intrinsically safe digital multimeter (DMM) you can use in IIC (gas), in Zones 1 and 2, and IIIC (dust), Zones 21 and 22. Whether you work in an oil, chemical, or pharmaceutical environment , all the test and troubleshooting capabilities you need are in the most robust and intrinsically secure (IS) Fluke DMM ever made. The Fluke 28 II Ex is also water, dust and drop resistant. You will be equipped to solve all problems, inside and outside the danger zone, without compromising on compliance or measurement performance.

Six super bright white LEDs make this torch the perfect companion for any nighttime activity. This highly versatile torch boasts a long battery life, combined with an ultra-durable casing to keep your path illuminated - no matter where you go.

Features and Benefits
• 100,000+ hour LED life
• Battery life up to 50 hours (continuous)
• Corrosion-resistant anodised finish
• Water and impact resistant - suitable for tough use
• Complete with wrist strap for easy, worry-free usage

Typical Applications
• Most efficient at night

Notes
• Required 2 x AA batteries (not included)