Products

Gembok LOTO Green Zenex Thermoplastic Safety, dengan Lebar 1-1/2in (38mm) dan Tinggi Shackle 3in (76mm)

Fitur Produk:
– Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), Tinggi 3in (76mm), dengan jarak bebas Shackle 1-1/2in (38mm)
– Didesain khusus untuk aplikasi penandaan penguncian
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Keamanan tinggi, disediakan untuk silinder pengaman
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack 6, Master Carton Qty 36

Connector to Female Parallel


Quick and simple tube insertion. Compact lightweight design with a well proven tube retaining system. Tapered threads have a re-usable thread seal and parallel threads have a rubber washer. Main body manufactured from nickel plated brass, acetal resin, PBT with a stainless steel retaining ring, nitrile tube seal and acetal resin tube release collar.


Pressure range: -0.9bar min to +10bar max. Temp range: -20°C min to +70°C max. Tube suitability: Nylon, polyurethane.

The three-phase power logger with the mobile app and desktop software Fluke Connect® is compatible, offers you the data you need to make informed decisions for the optimisation of power quality and energy consumption. As the ideal measuring instrument for energy studies and basic power quality logging records and logs the Power Logger automatically supply quality parameters, so that you get more insight into the data and both the reliability of the system as well as the savings can optimize.



This text is machine translated.



Highlights & Details

- Includes 4 Flex clamp-on ammeter

- This text is machine translated.



Facts

- Automatic Capture and logging of over 500 power supply quality parameters

- Via Fluke Connect® users may the recorded data can be displayed either on site or remotely

- Direct supply of the logger via the measured line and the intelligent review feature reduces the measuring errors significantly

- Software Fluke Energy Analysis Plus enables the measurement results to capture, display, identify problems and detailed reports

- Load studies.

- Energy assessments

- Harmonic measurements

- Recording of voltage events

- Recording of voltage events

- Extended analysis according to EN50160 and waveform snapshots

- Optional IEEE 519 distortion factor measurements.



Delivery

- 1 x PSU

- 1x voltage measuring leads

- 4x alligator clips

- 4x flexible current probes (30 cm, 1500A)

- 1x Carrying Case

- 1 x energy analysis software

- 1x power cord

- 1 x color coding set

- Documentation on USB flash drive

- 1 x magnetic suspension belt

- 4 x magnetic voltage measuring tips.

The PARAT® filtering escape hoods were developed with users, placing the focus on the fastest possible escape. Optimized operation and wearing comfort, a robust case and a sealed filter ensure protection from toxic industrial and/or fire-related gases, vapours and particles for at least 15 minutes.

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12747LD2031
Type of Light Source : LED
Power Input : 661W
System Lumen Output : 103400 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 54deg.
Beam Angle : 34deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx537mmx720mm
Body : ADC

Cut 6 carbide rotary burrs feature a crosscut and double cut to improve control and chipbreaks. Manufactured from high grade tungsten carbide for general-purpose use.

Features and Benefits
• Manufactured from carbide for greater hardness
• Cut 6 crosscut and double cut to improve control and chipbreaks
• Suitable for use on hard materials up to HRC65 hardness

Typical Applications
• Deburring
• Cast iron
• Cast steel
• Carbon steel
• Alloy steel
• Stainless steel

Notes
• Work piece and tools should always be steady and well supported
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used
• Always ensure that the tool is rated to the recommended operating speed of the burr

Cut 6 - Double Cut.

Cut 9 - Chipbreaker
Chipbreaker fast stock removal for improved control and reduced chips for use on hard materials, i.e. steel alloy 50RC, 60RC, carbon and cast iron.

Suitable for deburring and polishing of cast iron, cast steel, carbon steel, alloy steel and stainless steel etc.
up to HRC65 hardness.

Please note:
• Work piece and tools should always be steady and well supported.
• Carbide burrs are not suitable for 'milling' large amounts of material, they are for light stock removal and high revolutions 'LOW FEED - HIGH SPEED'.
• Always ensure that at least 70% of the shank length is clamped by the collet or chuck of the tool being used.
• Always ensure that the tool is rated to the recommended operating speed of the burr.

With a 1/2" square drive, these vanadium steel bi-hexagonal sockets are the ideal product for working on hard to reach fastenings or more stubborn fastenings due to their 12 point design. Possessing a higher torque than normal sockets, this range of sockets can also effectively grip worn nuts and won't round off existing nuts. Finished with a ball-retaining groove on each face of the square drive, which ensures a positive fit with accessories.

Features and Benefits
• Side drive design gives a higher torque than regular sockets
• Ball retaining groove on each product ensures a positive fit with compatible accessories
• Manufactured from vanadium steel for durability
• Available in a variety of sizes to allow you to purchase the size that best suits your requirements
• Requires only a one-twelfth turn to engage the next point of the socket

Typical Applications
• Ideal for use when tightening or loosening hexagonal shaped fastenings in a variety of industries including:
• Automotive
• Construction
• Agricultural
• Plumbing

Cartridge Rolls Aluminium Oxide Cloth Rolls used for weld flash removal, deburring, blending and polishing applications.

Features and Benefits
• Spirally wound cloth rolls wear in use, constantly exposing new abrasive
• Tapered type which is ideal for angles, corners and irregular or concave surfaces

Notes
• An appropriate steel mandrel must be used to secure the abrasive to the tool
• Available in two types

The Dräger PARAT® 3260 is a mouthpiece / nose clip escape device equipped with a multi-gas ABEK15 filter. Approved to the only recognized standard for filtering industrial escape devices (DIN 58647-7), it provides users a minimum of 15 minutes escape time. Compared to PARAT® 3200, the device and filter are vacuum sealed in an aluminum barrier bag, making it better suited for diverse climate zones.

Gembok LOTO, Black Zenex Thermoplastic Safety. Lebar Body 1-1/2in (38mm) dengan tinggi Shackle 3in (76mm)

Fitur Utama:
– 410 Gembok Pengaman Termoplastik
– Lebar 1-1/2in (38mm), tinggi 1-3/4in (44mm), Shackle dengan jarak bebas 3in (76mm)
– Didesain khusus untuk aplikasi penguncian/tagout
– Bodi kunci termoplastik yang tahan lama, ringan, dan tidak konduktif
– Sesuaikan di tempat dengan label permanen dan tertulis
– Kepatuhan terhadap arahan “One Employee, One Lock, One Key”
– Silinder keamanan tinggi, disediakan untuk keselamatan
– Penahan kunci – memastikan bahwa gembok tidak dibiarkan terbuka
– Kunci berbeda, 6-pin tumbler dengan lebih dari 40.000 silinder penggantian kunci yang tersedia, Shelf – Pack Qty 6, Master Carton Qty 36

For use with Kennedy grease guns and all other hydraulic grease equipment.

Ideal for post rooms, offices and the warehouse. Rubber feet protect surface and prevent dispenser from slipping. Takes large rolls of tape up to 50mm wide and 66m long. Can be screwed to bench.

Features and Benefits
• Highly durable, all metal construction
• Can be screwed to bench
• Tape not included