Products

M18 ONEFHIWF1DS-0C
• The M18 FUEL D-Handle high torque impact wrench delivers 2,576Nm of fastening torque replacing AC, petrol or pneumatic solutions
• Delivers up to 2,711Nm of nut-busting torque that enables bolts up to M48 to be unfastened
• The 4 -Mode DRIVE CONTROL allows the user to shift into four different speed and torque settings to maximize application versatility

The Dräger Alcotest® 9510 is an advanced breath alcohol measuring instrument for evidential applications. It is designed to comply with national and international requirements and regulations (OIML R 126). With dual sensor technology, intuitive color touch screen interface, and modern design the Alcotest® 9510 sets superior standards.

A quick and easy solution to contain spills. Contains spills in the bund.
Heavy duty rotational moulded IBC spill pallets for single or double IBC storage applications. 100% polyethylene construction, corrosion resistant and with removable decking to assist cleaning they are suitable for most IBC footprints. Forklift pockets for ease of positioning and moving empty units. Please check the technical data sheet below to learn the weight capacity for each product.

Features and Benefits
-Made from polyethylene
-Fitted with grids
-It has base fork pockets
-Reusable
-Corrosion Resistant
-Grids to help with the upstand support
-Fork pockets which allow easy access when unloading/loading or moving the item.
-Compact, lightweight and strong

Notes
• Drums not included

The J100 Series are general purpose HSS straight shank drills with a black oxide finish. Ideal for applications involving steel (including cast steel) cast iron (including malleable cast iron) as well as nickel, brass aluminium alloys and graphite. Their 118° point allows for precise hole alignment and reliable cutting performance whilst the black oxide coating helps reduce heat by retaining coolant on the tool surface. The coating also helps reduce the risk of the tool staining.

Features and Benefits
• High speed steel construction for increased tool durability
• Point angle of 118° for precise holemaking and precision cutting
• Black oxide coating helps aid chip flow, reduce heat and prevent staining
• Ideal for applications involving steel, iron, nickel, brass, aluminium alloy and graphite

Typical Applications
• Cutting and drilling
• Ferrous materials
• Steel
• Iron
• Nickel
• Brass
• Aluminium alloy
• Graphite

Notes
• Available in sizes 0.25mm -20.00mm

Standards
• Manufactured to BS 328/DIN338RN

3M 361F
Tough resin-bonded aluminium oxide disc, for grinding and stock removal. Perfect for applications such as weld grinding and finishing.

Features and Benefits
• 3M Roloc attachment enables efficient yet secure installation and removal of the disc
• Class-leading highly-durable aluminum oxide abrasive grains cut fast and perform well on many surfaces
• Tough YF-weight, polyester backing supports medium-pressure applications and provides consistent performance
• Heat-resistant resin coating bonds abrasive to backing for extreme durability under pressure, heat, and water

Notes
• Maximum rpm:
25mm discs = 25000rpm
38, 50 and 75mm discs = 20000rpm

• Menghilangkan gemuk, oli, kotoran & gumpalan lengket yang membandel
• Aksi cepat
• Mudah dilapbersih dan dibilas dengan air

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12347LD2031
Type of Light Source : LED
Power Input : 264W
System Lumen Output : 41000 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 60deg.
Beam Angle : 54deg.
IP Rating : 75deg.
Ambient Temperature : -20 - 35°C
Dimensions : 422mmx534mmx340mm
Body : ADC

Type of Luminaire : Standard Floodlight (Pro) A Series
Set Model No : NYS12517LD2031
Type of Light Source : LED
Power Input : 442W
System Lumen Output : 63200 lm
Power Voltage : 200-242V
Lifetime : 40000H(L70)
CCT : 5000K
CRI : 70
Input Frequency : 50/60Hz
Dimming : non-Dimmable
Glare Cut Angle : 77deg.
Beam Angle : 27deg.
IP Rating : 65
Ambient Temperature : -20 - 35°C
Dimensions : 487mmx534mmx500mm
Body : ADC

This compact and robust handheld breath alcohol measuring device is especially designed for advanced screening applications. Ideal for use by police, commerce and industry as an alcohol screening device. The Alcotest® 7510 can in many countries and markets be used as an evidential device.

LUBCASTER

FORGING is processing method of creating an objective shape by compressing metallic substance in between molds. LUBCASTER is essential lubricants for producing auto engine components and safety parts.

F-55 : Light yellow transparent mucoid fluid Usable with high dilution by the high adhesion property, suitable to low temperature mold.
F-5110 : Black It is a graphite type. It has high lubricity and extends mold life.

Constructed from a resilient chrome vanadium steel, socket adaptors are suited for using a combination of square drive sockets in the same application. Available in two lengths, the product makes easy work of adapting to your desired application.

Features and Benefits
• Allows you to easily adapt your tool to suit a variety of applications
• Cost effective way of changing your tools' function without purchasing an entire tool
• Manufactured from chrome vanadium steel for durability

Typical Applications
• Automotive
• Engineering
• Construction
• DIY

IW500 - 1/2" Impact Wrench
One piece aluminium housing, 10 position power regulator, thumb switch for reversing, 1/4" NPT air inlet thread for 10mm air hose, 90psi air pressure, 300ft/lbs torque, 3.5cfm* air consumption.

Features and Benefits
• Highly efficient
• Durable aluminum design
• M16 bolt capacity

Notes
• Sound pressure level: 88dBA
• Vibration level: 4.2m/s²
• Overall length: 188mm

*Based on a 15 second cycle per minute average use